Unit 2 - Practice Quiz

1 In Engineering Drawing, the intersection of the Horizontal Plane (HP) and the Vertical Plane (VP) is called:

2 If a point is situated above the Horizontal Plane (HP) and in front of the Vertical Plane (VP), it is in the:

3 In First Angle Projection, the Front View (Elevation) is always drawn:

4 Which AutoCAD command is used to draw a continuous series of line segments that are treated as a single object?

5 What is the keyboard shortcut for the 'Circle' command in AutoCAD?

6 When a line is parallel to both HP and VP, its True Length is seen in:

7 If a line is perpendicular to the HP and parallel to the VP, its Top View will be:

8 To switch the 'Ortho Mode' ON or OFF in AutoCAD, which function key is used?

9 The point where a line intersects the Horizontal Plane is called the:

10 In AutoCAD, which coordinate entry format represents Relative Polar Coordinates?

11 If a point is located in the Fourth Quadrant, its projections on the 2D drawing sheet will show:

12 Which AutoCAD command allows you to draw a polygon?

13 When drawing a polygon in AutoCAD, 'Inscribed in circle' means:

14 A line inclined to HP and parallel to VP will have its True Inclination (θ) seen in:

15 Which command is used to configure dimension settings like text height and arrow size in AutoCAD?

16 If a line is parallel to the HP, its Vertical Trace (VT):

17 If a line is parallel to the HP, its Horizontal Trace (HT):

18 The Front View of a point is denoted by:

19 Which option in the AutoCAD ARC command is NOT a valid method to create an arc?

20 To draw an Ellipse in AutoCAD using the axis-end method, you must specify:

21 A point lies on the HP and in front of the VP. Its Front View will lie:

22 When a line is inclined to both HP and VP, the apparent lengths in Front and Top views are:

23 Which AutoCAD dimensioning command is best for measuring the length of an inclined line?

24 The Top View of a point is obtained by looking from:

25 In the Third Quadrant, the relationship of planes is:

26 What is the specific AutoCAD command to draw a rectangle?

27 If point A is 20mm above HP and 30mm in front of VP, the distance between a' and a on the drawing sheet is:

28 Which option allows you to draw a circle tangent to two objects with a specific radius in AutoCAD?

29 A line perpendicular to VP will appear as a __ in the Front View.

30 When dimensioning a circle in AutoCAD, the symbol 'Φ' denotes:

31 The 'Explode' command in AutoCAD is used to:

32 If a line is in the VP and inclined to the HP, its Horizontal Trace (HT) lies:

33 To create a chamfered corner on a rectangle in AutoCAD, you must set the:

34 A point situated in the Second Quadrant is:

35 In orthographic projection, the Side View is projected onto the:

36 If a line is parallel to the VP, its Top View is parallel to:

37 The AutoCAD command to join two separate lines into a single polyline is:

38 True Length of a line is the hypotenuse of a right-angled triangle formed by:

39 When using the 'Polygon' command, specifying 'Circumscribed about circle' means:

40 If a line lies on the HP, its Front View lies:

41 Which keyboard key cancels the current command in AutoCAD?

42 The intersection of a line with the Vertical Plane is known as:

43 If Point A is in the HP and 20mm behind the VP, its projection is:

44 What type of line is used to represent the axis of symmetry or center lines in engineering drawing?

45 In AutoCAD, the 'Trim' command is used to:

46 Which variable controls the global scale factor of dimensions in AutoCAD?

47 When a line is inclined to the VP and parallel to the HP, the angle of inclination (Φ) is measured in the:

48 To create a rounded corner between two lines in AutoCAD, use the command:

49 In First Angle Projection, the order of arrangement is:

50 Point P is 15mm above HP and 15mm in front of VP. The distance between its projectors measured along the XY line is: