Unit 5: Mechanics of shoulder, spine and hip - Practice Quiz

BTY730 — Biomechanics 60 Questions
0 Correct 0 Wrong 60 Left
0/60

1 Which joint is the main ball-and-socket joint of the shoulder complex?

structure of the shoulder Easy
A. Glenohumeral joint
B. Acromioclavicular joint
C. Sternoclavicular joint
D. Scapulothoracic joint

2 The group of four muscles that stabilize the glenohumeral joint is known as the:

structure of the shoulder Easy
A. Erector spinae
B. Hamstring group
C. Rotator cuff
D. Quadriceps group

3 The shallow socket of the scapula that receives the humeral head is called the:

structure of the shoulder Easy
A. Glenoid fossa
B. Coronoid fossa
C. Olecranon fossa
D. Acetabulum

4 Raising the arm forward and upward in the sagittal plane is called:

movements of shoulder complex Easy
A. Abduction
B. Extension
C. Adduction
D. Flexion

5 The coordinated movement between the humerus and scapula during arm elevation is known as:

movements of shoulder complex Easy
A. Cardiac rhythm
B. Circadian rhythm
C. Reciprocal rhythm
D. Scapulohumeral rhythm

6 Moving the arm away from the midline of the body in the frontal plane is called:

movements of shoulder complex Easy
A. Flexion
B. Adduction
C. Abduction
D. Pronation

7 Compressive loads on the glenohumeral joint generally increase when the arm is:

loads on the shoulder Easy
A. Held abducted horizontally
B. Resting on a support
C. Hanging relaxed at the side
D. Fully flexed at the elbow only

8 Which muscle is a major contributor to the compressive load at the glenohumeral joint during abduction?

loads on the shoulder Easy
A. Deltoid
B. Rectus femoris
C. Gastrocnemius
D. Gluteus maximus

9 Holding a heavy weight in the hand with the arm extended increases shoulder load mainly because it increases the:

loads on the shoulder Easy
A. Number of ligaments
B. Bone density
C. Range of motion
D. Moment arm of the load

10 How many vertebrae make up the typical human vertebral column (excluding fused sacral and coccygeal segments)?

structure of the spine Easy
A. 12
B. 24
C. 33
D. 7

11 The soft structure located between two adjacent vertebral bodies that acts as a shock absorber is the:

structure of the spine Easy
A. Transverse process
B. Spinous process
C. Intervertebral disc
D. Pedicle

12 The gel-like central portion of an intervertebral disc is called the:

structure of the spine Easy
A. Vertebral foramen
B. Facet joint
C. Annulus fibrosus
D. Nucleus pulposus

13 How many cervical vertebrae are present in the human spine?

structure of the spine Easy
A. 9
B. 7
C. 12
D. 5

14 Bending the trunk forward is an example of spinal:

movements of the spine Easy
A. Flexion
B. Extension
C. Lateral flexion
D. Rotation

15 Twisting the trunk to the left or right is termed spinal:

movements of the spine Easy
A. Flexion
B. Rotation
C. Abduction
D. Extension

16 Which muscle group is the primary extensor of the spine?

muscles and loads on the spine Easy
A. Deltoid
B. Erector spinae
C. Biceps brachii
D. Rectus abdominis

17 Lifting a load with a rounded back rather than a straight back tends to:

muscles and loads on the spine Easy
A. Increase loads on the lumbar spine
B. Have no effect on spinal loads
C. Eliminate muscle activity
D. Decrease loads on the lumbar spine

18 The hip joint is classified as which type of synovial joint?

structure and movements of the hip Easy
A. Hinge joint
B. Pivot joint
C. Ball-and-socket joint
D. Gliding joint

19 The socket of the pelvis that receives the head of the femur is called the:

structure and movements of the hip Easy
A. Glenoid fossa
B. Olecranon
C. Acetabulum
D. Patella

20 During single-leg standing, the load on the hip joint is typically:

loads on the hip Easy
A. Less than half body weight
B. Equal to zero
C. Greater than body weight
D. Independent of body weight

21 The shoulder complex consists of four articulations. Which of the following is a physiological (functional) joint rather than a true synovial joint?

structure of the shoulder Medium
A. Acromioclavicular joint
B. Scapulothoracic joint
C. Glenohumeral joint
D. Sternoclavicular joint

22 The glenohumeral joint is inherently unstable because the glenoid fossa covers only a small portion of the humeral head. Which structure primarily deepens the socket to improve stability?

structure of the shoulder Medium
A. Coracoacromial ligament
B. Subacromial bursa
C. Glenoid labrum
D. Transverse humeral ligament

23 During full arm abduction to , the scapulohumeral rhythm describes the ratio of glenohumeral to scapulothoracic motion. What is the commonly accepted overall ratio?

movements of shoulder complex Medium
A.
B.
C.
D.

24 A patient can only abduct the arm to about before further motion is blocked. Which movement is normally required to allow abduction beyond by clearing the greater tubercle from under the acromion?

movements of shoulder complex Medium
A. Scapular downward rotation
B. Internal rotation of the humerus
C. Clavicular depression
D. External rotation of the humerus

25 When the arm is held horizontally in abduction, the deltoid must generate a large force. This is primarily because the muscle's line of action creates a short moment arm relative to the long external load arm of the outstretched limb, which requires the muscle to compensate for the mechanical disadvantage by producing forces several times body-segment weight.

loads on the shoulder Medium
A. The muscle acts with a small moment arm against a long load arm
B. Gravity is the only force acting on the arm
C. The rotator cuff provides no compression
D. The joint reaction force always exceeds arm weight

26 The rotator cuff muscles are essential for stability during abduction primarily because they:

loads on the shoulder Medium
A. Prevent all clavicular rotation
B. Provide the majority of the abduction torque
C. Deepen the glenoid fossa mechanically
D. Compress the humeral head into the glenoid and counter the deltoid's superior pull

27 A typical intervertebral disc consists of a central gel-like core and a surrounding fibrous ring. Which component primarily resists compressive loads by generating hydrostatic pressure?

structure of the spine Medium
A. Nucleus pulposus
B. Annulus fibrosus
C. Ligamentum flavum
D. Vertebral endplate

28 The normal adult spine has curves in the sagittal plane. Which of the following correctly pairs a region with its curve type?

structure of the spine Medium
A. Lumbar — lordosis
B. Thoracic — lordosis
C. Sacral — lordosis
D. Cervical — kyphosis

29 In which region of the spine is axial rotation greatest, largely due to the orientation of the facet joints in the transverse/oblique plane?

movements of the spine Medium
A. Coccygeal region
B. Sacral region
C. Thoracic region
D. Lumbar region

30 The coupling of lateral bending with axial rotation is a characteristic motion of the spine. This phenomenon of two movements occurring together is best described as:

movements of the spine Medium
A. Reciprocal inhibition
B. Passive insufficiency
C. Isolated motion
D. Coupled motion

31 When lifting a load with the trunk flexed forward, the erector spinae muscles must generate very large forces. This is chiefly because these muscles have a:

muscles and loads on the spine Medium
A. Longer moment arm than the external load
B. Negligible contribution to spinal compression
C. Short moment arm relative to the long moment arm of the external load
D. Direct vertical line of pull equal to the load

32 Intra-abdominal pressure (IAP) is thought to help reduce spinal loading during lifting because it:

muscles and loads on the spine Medium
A. Eliminates the need for trunk muscle activity
B. Shortens the load moment arm to zero
C. Creates an extensor moment that partly relieves the erector spinae
D. Directly compresses the intervertebral discs

33 Nachemson's classic studies showed that intradiscal pressure in the lumbar spine changes with posture. Which position generally produces the highest L3 disc pressure?

muscles and loads on the spine Medium
A. Lying on the side
B. Lying supine
C. Sitting while leaning forward holding a weight
D. Standing upright relaxed

34 The hip is classified as a ball-and-socket (spheroidal) joint. The depth and stability of its socket are enhanced by which fibrocartilaginous structure?

structure and movements of the hip Medium
A. Acetabular labrum
B. Iliotibial band
C. Ligamentum teres
D. Transverse acetabular sulcus

35 The angle of inclination of the adult femur (between the neck and shaft) is normally about . A pathological decrease in this angle is termed:

structure and movements of the hip Medium
A. Retroversion
B. Anteversion
C. Coxa vara
D. Coxa valga

36 Which muscle group is the primary generator of hip extension and is especially active during activities like climbing stairs and rising from a squat?

structure and movements of the hip Medium
A. Tensor fasciae latae
B. Gluteus maximus
C. Iliopsoas
D. Adductor longus

37 During single-leg stance, the hip abductors must contract to keep the pelvis level. Because the abductor moment arm is short relative to the long moment arm of body weight, the resulting joint reaction force at the hip is approximately:

loads on the hip Medium
A. Half of body weight
B. times body weight
C. Equal to body weight
D. times body weight

38 A patient with weak hip abductors on the stance leg exhibits a dropping of the pelvis on the opposite (swing) side during walking. This clinical sign is called:

loads on the hip Medium
A. Faber sign
B. Thomas test
C. Trendelenburg sign
D. Ober sign

39 Why does using a cane in the hand opposite to an affected hip reduce the hip joint reaction force more effectively than using it on the same side?

loads on the hip Medium
A. It eliminates the need for abductor contraction
B. It provides an external upward force with a long moment arm about the affected hip, reducing the abductor force needed to balance the pelvis
C. It increases the abductor moment arm directly
D. It shifts body weight entirely off the affected limb

40 The subacromial space houses the supraspinatus tendon and subacromial bursa. Repeated compression of these structures during overhead activity, leading to pain, is commonly termed:

loads on the shoulder Medium
A. Acromioclavicular separation
B. Glenoid labral tear
C. Adhesive capsulitis
D. Subacromial impingement

41 A person holds a weight in the hand with the arm abducted horizontally. The deltoid inserts at from the glenohumeral joint at an angle of to the humerus, and the center of mass of the arm () is at while the weight is at . Approximately what deltoid muscle force is required for equilibrium?

loads on the shoulder Hard
A.
B.
C.
D.

42 During of humeral elevation, the scapulohumeral rhythm is commonly described as . If the glenohumeral joint contributes its full expected share, how much scapular rotation occurs and what is the approximate glenohumeral contribution?

movements of shoulder complex Hard
A. scapular, glenohumeral
B. scapular, glenohumeral
C. scapular, glenohumeral
D. scapular, glenohumeral

43 The glenoid labrum and negative intra-articular pressure both contribute to glenohumeral stability. Which statement best explains why labral removal disproportionately compromises stability in mid-range motion?

structure of the shoulder Hard
A. The labrum deepens the socket by up to ~50% and increases the concavity-compression contact area, which dominates when capsuloligamentous structures are lax
B. The labrum's sole function is to seal synovial fluid and prevent evaporation
C. The labrum generates active muscular tension that increases with abduction
D. The labrum is the primary static restraint against inferior translation only

44 Considering the intervertebral disc as a hydrostatic structure, why does the nucleus pulposus lose its ability to distribute load evenly with age-related dehydration?

structure of the spine Hard
A. Reduced proteoglycan content lowers water-binding, decreasing hydrostatic pressure so load transfers unevenly to the annulus and endplates
B. The annulus fibers reorient vertically, eliminating hoop stress
C. Increased collagen crosslinking makes the nucleus fully incompressible
D. The endplates calcify and directly bear all compressive load without disc involvement

45 A worker lifts a box held anterior to the L5-S1 disc. The erector spinae act with a moment arm of . Neglecting body weight, estimate the muscle force and the approximate compressive load on the disc (assume muscle force acts roughly vertically).

loads on the spine Hard
A. Muscle ; compression
B. Muscle ; compression
C. Muscle ; compression
D. Muscle ; compression

46 Intra-abdominal pressure (IAP) is proposed to reduce spinal compression during lifting. Which mechanism best captures how IAP unloads the lumbar spine?

muscles and loads on the spine Hard
A. IAP shifts the center of mass posteriorly, removing the flexion moment entirely
B. IAP creates an extensor moment via the diaphragm and pelvic floor, reducing the required erector spinae force and thus compression
C. IAP eliminates the need for any trunk muscle activity during lifting
D. IAP directly stiffens the intervertebral discs by increasing their internal water content

47 Using a simplified single-leg stance model, if body weight is , the weight supported (minus the stance leg, BW) acts at medial to the hip center, and the abductors act at lateral, what is the approximate joint reaction force at the hip?

loads on the hip Hard
A.
B.
C.
D.

48 The femoral neck-shaft angle averages about . In coxa valga (increased angle), how are the abductor moment arm and joint reaction force affected during single-leg stance?

structure and movements of the hip Hard
A. Moment arm increases, joint reaction force decreases
B. Moment arm decreases, requiring greater abductor force and increasing joint reaction force
C. Both moment arm and joint reaction force remain unchanged
D. Moment arm increases, dramatically reducing required abductor force

49 During trunk flexion, the 'flexion-relaxation phenomenon' describes erector spinae EMG silence at full flexion. What structure primarily bears the flexion moment at this point, and what is the clinical risk?

movements of the spine Hard
A. Active erector spinae contraction; risk of muscle strain
B. Passive posterior ligaments and thoracolumbar fascia; risk of ligamentous creep and injury under sustained load
C. The intervertebral discs alone; risk of endplate fracture
D. The facet joints in compression; risk of cartilage wear

50 Rotator cuff force is essential for the concavity-compression mechanism. During early abduction, why does supraspinatus dysfunction lead to superior humeral migration despite an intact deltoid?

loads on the shoulder Hard
A. The deltoid pulls the humerus inferiorly, so cuff loss removes the only elevator
B. The deltoid line of action has a superiorly directed shear component that is unopposed without cuff compression
C. The supraspinatus is the sole abductor and the deltoid cannot generate abduction torque
D. Cuff loss increases intra-articular pressure, forcing the head upward

51 The orientation of lumbar facet joints differs from cervical facets. How does the predominantly sagittal orientation of lumbar facets influence available motion and load resistance?

structure of the spine Hard
A. It equally permits all motions with no directional preference
B. It permits large axial rotation but limits flexion-extension
C. It resists axial rotation and anterior shear while permitting flexion-extension
D. It primarily resists compression and permits free rotation

52 The 'setting phase' of scapulohumeral rhythm occurs in the first of elevation. What is the biomechanical significance of the variable scapular motion in this phase?

movements of shoulder complex Hard
A. The scapula depresses to lengthen the deltoid
B. The clavicle fully elevates before any humeral motion
C. The scapula rotates maximally to prevent glenoid tilt
D. Scapular motion is inconsistent as the scapula seeks a stable position, with most early motion occurring at the glenohumeral joint

53 A cane held in the contralateral hand reduces hip joint load. If a cane provides a downward force of at from the stance hip while the abductors act at , by approximately how much does the cane reduce the required abductor force?

loads on the hip Hard
A. reduction
B. reduction
C. reduction
D. reduction

54 Why does the lever-arm disadvantage of the erector spinae make even moderate lifting produce disc compression far exceeding the external load?

muscles and loads on the spine Hard
A. Because the load acts closer to the joint than the muscles do
B. Because the muscles insert far from the joint, reducing required force
C. Because muscle contraction reduces intra-abdominal pressure
D. Because the short posterior muscle moment arm (~5 cm) versus the long anterior load moment arm requires large muscle forces that add to compression

55 Femoral anteversion averages ~–. In excessive anteversion, what compensatory gait pattern and biomechanical consequence typically arise?

structure and movements of the hip Hard
A. Toe-walking with increased ankle plantarflexion
B. In-toeing gait to center the femoral head, reducing effective hip external rotation
C. Circumduction gait with no rotational change
D. Out-toeing gait with increased external rotation range

56 Coupled motion in the cervical spine links lateral flexion with axial rotation. Below C2, to which side does the spinous process typically rotate during ipsilateral lateral flexion, and why?

movements of the spine Hard
A. Toward the concavity, due to facet joint orientation guiding coupled rotation
B. Away from the concavity, independent of facet geometry
C. It does not rotate at all below C2
D. Toward the convexity randomly with no consistent pattern

57 The coracoacromial arch forms the roof of the subacromial space. Which combination of factors most increases the risk of mechanical impingement of the supraspinatus tendon?

structure of the shoulder Hard
A. A flat (Type I) acromion with strong cuff and good scapular upward rotation
B. A hooked (Type III) acromion combined with weak cuff and reduced scapular upward rotation
C. Excessive scapular upward rotation with a Type I acromion
D. Increased subacromial space with normal cuff tension

58 Comparing standing, sitting unsupported, and lying supine, Nachemson's classic disc pressure studies showed which relative ordering of L3 intradiscal pressure?

loads on the spine Hard
A. Sitting lying standing
B. Lying standing sitting
C. Standing sitting lying, all nearly equal
D. Sitting unsupported standing lying supine

59 During full elevation the humerus must externally rotate. What is the primary biomechanical reason external rotation is required to reach full overhead elevation?

movements of shoulder complex Hard
A. To clear the greater tuberosity from beneath the coracoacromial arch and unwind the inferior capsule
B. To lengthen the deltoid for greater force output
C. To align the biceps tendon with the bicipital groove
D. To increase intra-articular pressure for stability

60 The acetabular labrum contributes to hip stability and a fluid seal. How does labral loss primarily alter hip joint mechanics beyond reduced stability?

structure and movements of the hip Hard
A. It increases synovial fluid pressurization, lowering cartilage stress
B. It shifts load entirely to the ligamentum teres
C. It eliminates all rotational motion at the hip
D. It disrupts the fluid seal, reducing hydrostatic support so cartilage bears higher direct contact stress