Unit 7: Immunological assays - Practice Quiz

BTY555 — Biotechnology Laboratory-I 60 Questions
0 Correct 0 Wrong 60 Left
0/60

1 What does the abbreviation ELISA stand for?

Demonstration of antigen antibody interaction by ELISA method Easy
A. Enzyme-Linked Immunosorbent Assay
B. Enzyme-Labeled Immunosorbent Antigen
C. Electrophoretic Linked Immuno Serum Assay
D. Enzyme-Linked Immunoselective Antibody

2 ELISA is primarily used to detect the interaction between which two molecules?

Demonstration of antigen antibody interaction by ELISA method Easy
A. Lipid and protein
B. Antigen and antibody
C. Enzyme and substrate only
D. DNA and RNA

3 Which type of plate is most commonly used to perform an ELISA?

Demonstration of antigen antibody interaction by ELISA method Easy
A. Glass slide
B. Agar plate
C. 96-well microtiter plate
D. Petri dish

4 The enzyme in an ELISA reaction produces a detectable signal by acting on a specific:

Demonstration of antigen antibody interaction by ELISA method Easy
A. Antigen
B. Substrate
C. Antibody
D. Buffer salt

5 Which enzyme is commonly conjugated to antibodies in ELISA?

Demonstration of antigen antibody interaction by ELISA method Easy
A. Restriction endonuclease
B. Horseradish peroxidase (HRP)
C. Reverse transcriptase
D. DNA polymerase

6 In a typical ELISA, a positive result is usually indicated by:

Demonstration of antigen antibody interaction by ELISA method Easy
A. A color change in the well
B. Formation of a precipitate ring
C. Release of gas bubbles
D. A drop in temperature

7 Which instrument is used to measure the color intensity of the final ELISA product?

Demonstration of antigen antibody interaction by ELISA method Easy
A. Autoclave
B. pH meter
C. ELISA reader (spectrophotometer)
D. Centrifuge

8 The step of adding a protein solution to block unoccupied sites on the plate is called:

Demonstration of antigen antibody interaction by ELISA method Easy
A. Washing
B. Coating
C. Elution
D. Blocking

9 Why is a washing step included between ELISA stages?

Demonstration of antigen antibody interaction by ELISA method Easy
A. To remove unbound reagents
B. To increase temperature
C. To change the plate color
D. To add more antigen

10 Which ELISA format uses two antibodies that bind to different sites of the same antigen?

Demonstration of antigen antibody interaction by ELISA method Easy
A. Competitive ELISA
B. Sandwich ELISA
C. Direct ELISA
D. Dot ELISA

11 In an indirect ELISA, the enzyme label is attached to the:

Demonstration of antigen antibody interaction by ELISA method Easy
A. Substrate
B. Secondary antibody
C. Primary antibody
D. Antigen

12 The molecule that is coated onto the plate surface in a direct ELISA is usually the:

Demonstration of antigen antibody interaction by ELISA method Easy
A. Stop solution
B. Substrate
C. Enzyme
D. Antigen

13 The specificity of ELISA is mainly due to:

Demonstration of antigen antibody interaction by ELISA method Easy
A. Specific antigen–antibody binding
B. Random enzyme activity
C. Plate material
D. Wash buffer composition

14 Which of the following is a common application of ELISA?

Demonstration of antigen antibody interaction by ELISA method Easy
A. Amplifying DNA fragments
B. Detecting antibodies against a pathogen
C. Separating proteins by size
D. Sequencing genes

15 In competitive ELISA, the sample antigen competes with labeled antigen for binding to the:

Demonstration of antigen antibody interaction by ELISA method Easy
A. Plate surface only
B. Enzyme
C. Antibody
D. Substrate

16 What is the purpose of the stop solution in an ELISA?

Demonstration of antigen antibody interaction by ELISA method Easy
A. To halt the enzyme–substrate reaction
B. To dilute the sample
C. To wash the wells
D. To coat the plate

17 The optical density (OD) measured in an ELISA is generally proportional to the:

Demonstration of antigen antibody interaction by ELISA method Easy
A. Number of wells used
B. Amount of analyte present
C. Volume of wash buffer
D. Temperature of the room

18 Which of these is NOT a standard component of an ELISA test?

Demonstration of antigen antibody interaction by ELISA method Easy
A. Thermal cycler
B. Antibody
C. Substrate
D. Microtiter plate

19 In ELISA, the term immunosorbent refers to the:

Demonstration of antigen antibody interaction by ELISA method Easy
A. Washing buffer
B. Colored end product
C. Antigen or antibody bound to a solid surface
D. Free enzyme in solution

20 A major advantage of ELISA over many other immunoassays is that it:

Demonstration of antigen antibody interaction by ELISA method Easy
A. Works only on DNA
B. Cannot be quantified
C. Requires no antibodies
D. Avoids the use of radioactive labels

21 In a sandwich ELISA, a researcher coats the plate with a capture antibody, adds the sample antigen, then adds a detection antibody conjugated to an enzyme. What is the primary requirement for the antigen being detected using this format?

Demonstration of antigen antibody interaction by ELISA method Medium
A. The antigen must be enzyme-labeled
B. The antigen must be a small hapten
C. The antigen must be denatured before coating
D. The antigen must possess at least two distinct epitopes

22 A student observes a strong color signal in the negative control wells of an indirect ELISA. Which of the following is the most likely cause?

Demonstration of antigen antibody interaction by ELISA method Medium
A. The primary antibody concentration was too low
B. Too little substrate was added
C. The plate was washed too many times
D. Inadequate blocking leading to non-specific binding

23 Which enzyme-substrate pair is commonly used in ELISA and produces a yellow color upon reaction?

Demonstration of antigen antibody interaction by ELISA method Medium
A. Alkaline phosphatase with pNPP
B. Glucose oxidase with ABTS
C. Beta-galactosidase with X-gal
D. Horseradish peroxidase with luminol

24 In an indirect ELISA used to detect anti-HIV antibodies, what is directly immobilized on the microtiter plate surface?

Demonstration of antigen antibody interaction by ELISA method Medium
A. Chromogenic substrate
B. Purified viral antigen
C. Enzyme-labeled antibody
D. Patient's serum antibody

25 A competitive ELISA shows an inverse relationship between analyte concentration and signal. This means that:

Demonstration of antigen antibody interaction by ELISA method Medium
A. Signal is independent of analyte concentration
B. Color develops only in the absence of enzyme
C. High analyte gives a high color signal
D. High analyte gives a low color signal

26 Why are wash steps critical between each stage of an ELISA protocol?

Demonstration of antigen antibody interaction by ELISA method Medium
A. To remove unbound reagents and reduce background
B. To dilute the substrate for reaction
C. To increase enzyme activity
D. To denature the bound antigen

27 In an ELISA, the optical density (OD) of a test sample is and the cut-off value is . How should this result be interpreted?

Demonstration of antigen antibody interaction by ELISA method Medium
A. Positive only if OD is below cut-off
B. Positive, since OD exceeds the cut-off
C. Negative, since OD exceeds the cut-off
D. Invalid, since OD must equal the cut-off

28 Which component provides the specificity of antigen detection in a direct ELISA?

Demonstration of antigen antibody interaction by ELISA method Medium
A. The stop solution
B. The blocking buffer protein
C. The chromogenic substrate
D. The enzyme-conjugated primary antibody

29 The addition of a stop solution (e.g., dilute ) to an HRP-TMB ELISA reaction serves to:

Demonstration of antigen antibody interaction by ELISA method Medium
A. Wash away unbound conjugate
B. Halt the enzymatic reaction and stabilize the color
C. Block free binding sites
D. Start the enzymatic reaction

30 A sandwich ELISA is generally more sensitive than a direct ELISA primarily because:

Demonstration of antigen antibody interaction by ELISA method Medium
A. The antigen is directly labeled with enzyme
B. Signal amplification occurs through multiple antibody layers
C. No blocking step is needed
D. Fewer wash steps are required

31 In an indirect ELISA, the secondary antibody is described as anti-species. What does this mean?

Demonstration of antigen antibody interaction by ELISA method Medium
A. It is raised against the blocking protein
B. It is raised against the coated antigen
C. It is raised against immunoglobulins of the host species of the primary antibody
D. It is raised against the enzyme substrate

32 During ELISA optimization, a technician finds that increasing the primary antibody beyond a certain concentration no longer increases signal. This plateau indicates:

Demonstration of antigen antibody interaction by ELISA method Medium
A. Loss of enzyme activity
B. Incomplete blocking of the plate
C. Saturation of available antigen binding sites
D. Degradation of the substrate

33 Which of the following best explains why a standard curve is prepared in a quantitative ELISA?

Demonstration of antigen antibody interaction by ELISA method Medium
A. To measure the pH of each well
B. To relate measured OD values to known antigen concentrations
C. To confirm plate coating uniformity only
D. To determine the wash buffer volume

34 A false-negative ELISA result for antibody detection could occur if:

Demonstration of antigen antibody interaction by ELISA method Medium
A. The blocking step was too long
B. The sample was collected during the early window period before seroconversion
C. The substrate was too concentrated
D. The plate was incubated at too low a temperature during coating

35 Which property makes microtiter plates made of polystyrene suitable for ELISA?

Demonstration of antigen antibody interaction by ELISA method Medium
A. They emit fluorescence spontaneously
B. They passively adsorb proteins onto their surface
C. They chemically digest antigens
D. They actively transport antibodies across membranes

36 If the enzyme conjugate in an ELISA is accidentally omitted, what result is expected?

Demonstration of antigen antibody interaction by ELISA method Medium
A. No color development in any well
B. Immediate color even without substrate
C. Color only in negative controls
D. Uniform strong color in all wells

37 In a competitive ELISA for a small hapten, why is the competitive format preferred over a sandwich format?

Demonstration of antigen antibody interaction by ELISA method Medium
A. Small haptens bind irreversibly to plastic
B. Small haptens produce color on their own
C. Small haptens cannot be labeled with enzymes
D. Small haptens have only one epitope and cannot bind two antibodies simultaneously

38 The wavelength at which OD is measured in an ELISA depends primarily on:

Demonstration of antigen antibody interaction by ELISA method Medium
A. The size of the antigen
B. The volume of blocking buffer
C. The color of the substrate reaction product
D. The number of wash steps

39 A technician runs an ELISA and gets weak signal in all wells including positive controls. Which cause is most consistent with this observation?

Demonstration of antigen antibody interaction by ELISA method Medium
A. The enzyme conjugate had lost activity
B. The washes were skipped entirely
C. Too much antigen was coated
D. Blocking buffer was omitted

40 Which statement correctly distinguishes direct from indirect ELISA?

Demonstration of antigen antibody interaction by ELISA method Medium
A. Direct uses two antibodies, indirect uses only one
B. Direct detects antibodies, indirect detects antigens only
C. Direct requires no coating step, indirect requires two coatings
D. Direct uses a labeled primary antibody, indirect uses a labeled secondary antibody

41 In a sandwich ELISA, a researcher observes strong signal in the negative control wells that contain only buffer and no antigen. The capture antibody, detection antibody, and enzyme-conjugate were all added normally. Which explanation most likely accounts for this false-positive background?

Demonstration of antigen antibody interaction by ELISA method Hard
A. The substrate was added before the stop solution, shortening the incubation
B. The antigen concentration in the sample was far above the linear range of the assay
C. The detection antibody is directly binding to inadequately blocked plastic surfaces and the capture antibody
D. The primary antibody has too high an affinity for the target antigen

42 A competitive ELISA is used to quantify a small hapten. In this format, the relationship between analyte concentration and measured absorbance is:

Demonstration of antigen antibody interaction by ELISA method Hard
A. Directly proportional — higher analyte gives higher signal
B. Inversely proportional — higher analyte gives lower signal
C. Sigmoidal and always increasing with analyte
D. Independent — signal is fixed regardless of analyte

43 The 'hook effect' (prozone) in a sandwich ELISA produces which counterintuitive result at very high antigen concentrations?

Demonstration of antigen antibody interaction by ELISA method Hard
A. A falsely high signal due to increased enzyme turnover
B. A perfectly linear signal extending to infinite antigen levels
C. Complete loss of capture antibody from the well surface
D. A falsely low signal because excess antigen saturates capture and detection antibodies separately

44 A standard curve for a direct ELISA gives absorbance values that plateau at high antigen concentrations. Which statement about interpreting an unknown sample reading in this plateau region is correct?

Demonstration of antigen antibody interaction by ELISA method Hard
A. Plateau readings should be multiplied by the blank absorbance
B. The sample must be diluted and re-assayed because readings in the plateau underestimate true concentration
C. The plateau values can be used directly as they are the most accurate
D. The plateau indicates the enzyme has been denatured

45 Why is TMB (3,3',5,5'-tetramethylbenzidine) commonly stopped with sulfuric acid () before reading at 450 nm rather than reading the blue product at 650 nm?

Demonstration of antigen antibody interaction by ELISA method Hard
A. The blue product cannot be measured by any spectrophotometer
B. 450 nm is the only wavelength ELISA readers can detect
C. The acid-stopped yellow product is more stable and gives higher, more reproducible absorbance at 450 nm
D. Acid destroys the HRP enzyme, which is required for accurate reading

46 A four-parameter logistic (4PL) model is fitted to an ELISA standard curve. What advantage does the 4PL provide over a simple linear fit?

Demonstration of antigen antibody interaction by ELISA method Hard
A. It accurately models the sigmoidal curve including the low- and high-dose asymptotes
B. It forces all data through the origin for better accuracy
C. It eliminates the need for replicate wells
D. It converts absorbance directly into enzyme units without standards

47 In an indirect ELISA for detecting anti-viral antibodies in serum, samples from previously vaccinated but uninfected individuals give positive signals. This is best described as:

Demonstration of antigen antibody interaction by ELISA method Hard
A. A hook effect at low antibody concentrations
B. Loss of assay sensitivity due to over-blocking
C. Failure of the secondary antibody conjugate
D. Cross-reactivity leading to reduced clinical specificity of the assay

48 A lab measures the following triplicate OD values for one well set: 0.42, 0.44, and 0.98. Before calculating concentration, the analyst should:

Demonstration of antigen antibody interaction by ELISA method Hard
A. Multiply the three values together to reduce noise
B. Flag 0.98 as a likely outlier (e.g., a bubble or pipetting error) and investigate before averaging
C. Discard the two lowest values and keep 0.98
D. Average all three values because ELISA data are always reliable

49 Which sequence correctly orders the reagent additions in a standard sandwich ELISA?

Demonstration of antigen antibody interaction by ELISA method Hard
A. Add antigen → coat capture antibody → add substrate → block → read
B. Add enzyme conjugate → add antigen → block → coat capture antibody → read
C. Block → add substrate → coat capture antibody → add antigen → stop → read
D. Coat capture antibody → block → add antigen → add detection antibody → add enzyme conjugate → add substrate → stop → read

50 An ELISA has a limit of detection (LOD) defined as the mean blank signal plus . If the mean blank OD is and the blank standard deviation is , the LOD in OD units is:

Demonstration of antigen antibody interaction by ELISA method Hard
A.
B.
C.
D.

51 During ELISA optimization, checkerboard titration is performed. Its primary purpose is to:

Demonstration of antigen antibody interaction by ELISA method Hard
A. Determine the optimal combination of coating antigen and antibody dilutions that maximizes signal-to-noise
B. Establish the storage stability of the microplate over time
C. Measure the enzyme kinetics of the substrate reaction
D. Calibrate the spectrophotometer at multiple wavelengths

52 A researcher switches from a direct ELISA to an indirect ELISA using the same primary antibody. What is the main expected consequence?

Demonstration of antigen antibody interaction by ELISA method Hard
A. The primary antibody no longer needs to bind antigen
B. Increased sensitivity due to signal amplification from multiple labeled secondary antibodies binding one primary
C. Reduced sensitivity because fewer enzyme molecules are involved
D. Complete loss of specificity for the antigen

53 Two anti-target antibodies are being evaluated as a capture/detection pair for a sandwich ELISA. Which property is most critical for them to function together?

Demonstration of antigen antibody interaction by ELISA method Hard
A. They must be raised in the same host species
B. They must have identical affinity constants
C. They must both be polyclonal antibodies
D. They must recognize non-overlapping (distinct) epitopes on the antigen

54 A serum sample gives an OD of . From a 4PL standard curve, this corresponds to . The sample was diluted before assay. The concentration in the original undiluted serum is:

Demonstration of antigen antibody interaction by ELISA method Hard
A.
B.
C.
D.

55 Why does inadequate washing between ELISA steps typically increase background rather than decrease specific signal?

Demonstration of antigen antibody interaction by ELISA method Hard
A. It reduces the pH of the substrate buffer below optimal
B. It removes the capture antibody from the well surface
C. It permanently denatures the coated antigen
D. Unbound enzyme conjugate remains in the wells and generates non-specific colour development

56 In assay validation, an ELISA shows 95% sensitivity and 80% specificity. In a population where disease prevalence is only 2%, what is the main practical concern with a positive result?

Demonstration of antigen antibody interaction by ELISA method Hard
A. The negative predictive value will be near zero
B. The assay cannot detect true positives at all
C. Low positive predictive value — most positives will be false positives due to low prevalence
D. Sensitivity must be recalculated as 80%

57 Biotin-streptavidin systems are frequently incorporated into ELISA detection. The main rationale is that:

Demonstration of antigen antibody interaction by ELISA method Hard
A. The system removes the need for any enzyme in the assay
B. Biotin blocks all non-specific binding sites on the plate
C. Streptavidin directly cleaves the substrate to produce colour
D. The extremely high-affinity biotin–streptavidin interaction and multivalency amplify and stabilize the signal

58 An ELISA plate reader corrects readings using a reference wavelength (e.g., 570 nm subtracted from 450 nm). The purpose of this dual-wavelength correction is to:

Demonstration of antigen antibody interaction by ELISA method Hard
A. Increase the enzymatic reaction rate
B. Compensate for optical imperfections such as scratches, fingerprints, or bubbles in the plate
C. Extend the linear range of the standard curve to infinity
D. Convert absorbance to fluorescence units

59 A researcher wants to detect a conformational epitope that is destroyed by drying antigen onto the plate. The most appropriate ELISA design modification is:

Demonstration of antigen antibody interaction by ELISA method Hard
A. Use a capture (sandwich) format so the antigen is held in near-native conformation by an antibody
B. Use a direct ELISA with prolonged plate drying
C. Coat at 65 °C to speed adsorption
D. Increase the coating buffer pH to 12 to preserve structure

60 The intra-assay coefficient of variation (CV) of an ELISA is calculated from replicate wells as . If replicate ODs have mean and standard deviation , the CV is:

Demonstration of antigen antibody interaction by ELISA method Hard
A.
B.
C.
D.