Plastic impressions are three-dimensional and form when an object presses into a soft, pliable surface like mud, sand, or wax.
Incorrect! Try again.
7The study of lip prints for identification purposes is known as?
lip prints; their nature and location
Easy
A.Dactyloscopy
B.Odontology
C.Otoscopy
D.Cheiloscopy
Correct Answer: Cheiloscopy
Explanation:
Cheiloscopy is the forensic study of lip prints, which are unique to each individual and can aid in identification.
Incorrect! Try again.
8Lip prints are most commonly found on which of the following surfaces at a crime scene?
lip prints; their nature and location
Easy
A.Glasses, cups, and cigarette butts
B.Rough concrete walls
C.Metal door handles only
D.Wet soil surfaces
Correct Answer: Glasses, cups, and cigarette butts
Explanation:
Lip prints are often deposited on smooth surfaces that contact the lips, such as drinking glasses, cups, and cigarette butts.
Incorrect! Try again.
9What is the difference between a footprint and a footwear impression?
foot and footwear impressions; their nature and location of occurrence
Easy
A.A footprint is always three-dimensional while a footwear impression is always flat
B.A footprint is invisible while a footwear impression is always visible
C.A footprint is made by a bare foot while a footwear impression is made by a shoe
D.There is no difference between them
Correct Answer: A footprint is made by a bare foot while a footwear impression is made by a shoe
Explanation:
A footprint is left by a naked or socked foot, whereas a footwear impression is left by the outsole of a shoe or sandal.
Incorrect! Try again.
10Footwear impressions are most likely to be found at which location?
foot and footwear impressions; their nature and location of occurrence
Easy
A.Only on ceilings
B.Only on the victim's clothing
C.Exclusively inside locked safes
D.On floors, soil, and points of entry or exit
Correct Answer: On floors, soil, and points of entry or exit
Explanation:
Footwear impressions commonly occur on floors, doormats, soil, and near points of entry and exit where a suspect walks.
Incorrect! Try again.
11What does the term 'gait pattern' refer to?
importance of gait pattern
Easy
A.The manner or style in which a person walks
B.The temperature of a footprint
C.The chemical makeup of a footprint
D.The size of a person's shoe
Correct Answer: The manner or style in which a person walks
Explanation:
Gait pattern refers to an individual's distinctive walking style, including stride length and foot angle, which can aid identification.
Incorrect! Try again.
12A series of footprints showing the walking pattern of a person is called a?
importance of gait pattern
Easy
A.Gait line or walking line
B.Latent trail
C.Drag mark
D.Skid mark
Correct Answer: Gait line or walking line
Explanation:
A gait line (walking line) is formed by a sequence of footprints and reveals the individual's stride and walking characteristics.
Incorrect! Try again.
13Skid marks on a road are typically caused by?
tyre marks, skid marks and drag marks; their nature and location of occurrence
Easy
A.Sudden braking of a vehicle
B.Slow, steady acceleration
C.A parked stationary vehicle
D.Rainfall on the road
Correct Answer: Sudden braking of a vehicle
Explanation:
Skid marks form when a vehicle brakes suddenly and the tyres lose traction, sliding across the road surface.
Incorrect! Try again.
14Drag marks are usually associated with?
tyre marks, skid marks and drag marks; their nature and location of occurrence
Easy
A.A footprint in fresh snow
B.An object or body being pulled across a surface
C.A lip print on a glass
D.A vehicle turning smoothly at high speed
Correct Answer: An object or body being pulled across a surface
Explanation:
Drag marks are created when a heavy object or body is dragged across a surface, leaving a continuous trailing mark.
Incorrect! Try again.
15The forensic analysis of bite marks falls under which branch of science?
bite marks; nature, types and location of occurrence
Easy
A.Forensic ballistics
B.Forensic toxicology
C.Forensic odontology
D.Forensic serology
Correct Answer: Forensic odontology
Explanation:
Forensic odontology deals with the study of teeth and bite marks, which can help identify individuals from their dental patterns.
Incorrect! Try again.
16Bite marks at a crime scene are most commonly found on?
bite marks; nature, types and location of occurrence
Easy
A.Skin of a victim or food items
B.Metal tools only
C.Painted walls only
D.Vehicle tyres only
Correct Answer: Skin of a victim or food items
Explanation:
Bite marks are typically located on the skin of victims in assault cases or on food items such as cheese, fruit, or chocolate.
Incorrect! Try again.
17Ear prints are most often found at which location during a burglary investigation?
ear prints; nature and location of occurrence
Easy
A.On doors and windows where a suspect listened
B.On the vehicle tyres
C.On the ceiling
D.Inside a locked drawer
Correct Answer: On doors and windows where a suspect listened
Explanation:
Ear prints are commonly deposited on doors and windows when a suspect presses an ear against the surface to listen before entering.
Incorrect! Try again.
18Ear prints are considered useful in forensics because?
ear prints; nature and location of occurrence
Easy
A.Everyone's ears are exactly identical
B.The shape of the ear can be unique to an individual
C.They change completely every day
D.They dissolve immediately after contact
Correct Answer: The shape of the ear can be unique to an individual
Explanation:
The unique contours and structure of the outer ear can help distinguish individuals, making ear prints valuable evidence.
Incorrect! Try again.
19An 'original' tyre impression refers to one made by?
original and replaced tyre impressions
Easy
A.A punctured spare tyre only
B.A retreaded tyre only
C.The tyre that came fitted with the vehicle from the manufacturer
D.A tyre bought from a roadside shop
Correct Answer: The tyre that came fitted with the vehicle from the manufacturer
Explanation:
Original tyre impressions are made by the factory-fitted tyres, whereas replaced impressions come from tyres changed later by the owner.
Incorrect! Try again.
20The raised pattern on the surface of a tyre that contacts the road is called the?
tread nomenclature and indicator of wear and tear
Easy
A.Valve
B.Tread
C.Sidewall
D.Rim
Correct Answer: Tread
Explanation:
The tread is the patterned rubber surface of a tyre that grips the road and leaves distinctive impressions used in forensic analysis.
Incorrect! Try again.
21A forensic investigator finds a shoe impression that is invisible to the naked eye and requires oblique lighting or chemical treatment to be visualized. How should this impression be classified based on visual appearance?
classification of impressions on the basis of visual appearance
Medium
A.Patent impression
B.Negative impression
C.Plastic impression
D.Latent impression
Correct Answer: Latent impression
Explanation:
Latent impressions are not visible to the naked eye and require enhancement techniques such as oblique lighting, powders, or chemicals. Patent impressions are visible, while plastic (moulded) impressions are three-dimensional indentations in soft material.
Incorrect! Try again.
22A muddy footprint left on a tiled floor that is clearly visible without any enhancement belongs to which category of impression?
classification of impressions on the basis of visual appearance
Medium
A.Patent impression
B.Latent impression
C.Plastic impression
D.Etched impression
Correct Answer: Patent impression
Explanation:
Patent (visible) impressions are readily seen by the naked eye, typically formed when a contaminant like mud, blood, or dust transfers a pattern onto a surface. No special technique is needed to observe them.
Incorrect! Try again.
23An impression made when a shoe presses into soft soil, creating a three-dimensional mould of the sole, is best described as a:
foot and footwear impressions; their nature and location of occurrence
Medium
A.Latent transfer impression
B.Residue impression
C.Plastic (moulded) impression
D.Patent surface impression
Correct Answer: Plastic (moulded) impression
Explanation:
Plastic or moulded impressions are three-dimensional and form when a shoe or foot presses into a pliable material such as soil, snow, or wet sand, capturing depth as well as pattern detail.
Incorrect! Try again.
24Which of the following is the primary forensic significance of analyzing a suspect's gait pattern from a series of footprints?
importance of gait pattern
Medium
A.It identifies the chemical composition of the soil
B.It determines the age of the impression
C.It reveals the exact shoe brand worn
D.It reflects individual walking characteristics like stride length and foot angle
Correct Answer: It reflects individual walking characteristics like stride length and foot angle
Explanation:
A gait pattern (or walking picture) records habitual features such as stride length, straddle, and foot angle, which are relatively individual and can help link or narrow down a suspect even when shoe class characteristics alone are inconclusive.
Incorrect! Try again.
25In gait analysis, the perpendicular distance between the successive left and right footprints from the line of direction is known as the:
importance of gait pattern
Medium
A.Straddle (walking base)
B.Pitch line
C.Stride length
D.Foot angle
Correct Answer: Straddle (walking base)
Explanation:
The straddle, or walking base, is the side-to-side distance between the left and right foot placements. Stride length is the distance between successive prints of the same foot, and foot angle is the angle a foot makes with the line of direction.
Incorrect! Try again.
26The scientific study of lip prints for the purpose of personal identification is known as:
lip prints; their nature and location
Medium
A.Cheiloscopy
B.Rugoscopy
C.Odontology
D.Poroscopy
Correct Answer: Cheiloscopy
Explanation:
Cheiloscopy is the study of the patterns of grooves (sulci) on the lips. Rugoscopy studies palatal rugae, poroscopy examines sweat pores, and odontology is the broader study of teeth.
Incorrect! Try again.
27A lip print recovered from a drinking glass at a crime scene is valuable because the pattern of lip grooves is:
lip prints; their nature and location
Medium
A.Determined solely by age
B.Identical among close relatives
C.Unique to an individual and remains stable over life
D.Changed permanently after every meal
Correct Answer: Unique to an individual and remains stable over life
Explanation:
Lip groove patterns are considered individual-specific and remain generally stable throughout a person's life, which underpins their evidentiary value in cheiloscopy. They are commonly deposited on glasses, cups, and cigarette butts.
Incorrect! Try again.
28During a homicide investigation, a bite mark on the victim's skin needs to be linked to a suspect. Which forensic feature makes bite mark comparison possible?
bite marks; nature, types and location of occurrence
Medium
A.The saliva pH left in the wound
B.The arrangement, spacing, and wear of an individual's teeth
C.The depth of the epidermis penetrated
D.The color change around the bruise
Correct Answer: The arrangement, spacing, and wear of an individual's teeth
Explanation:
Bite mark analysis relies on the individual dental characteristics—tooth alignment, spacing, missing teeth, and wear patterns—that a dentition transfers to the bitten surface. Saliva may add DNA evidence but is separate from the mark morphology.
Incorrect! Try again.
29Which of the following combinations correctly represents common locations where bite marks are found in violent crimes?
bite marks; nature, types and location of occurrence
Medium
A.Exclusively on tyre surfaces
B.Only on hard, non-porous surfaces
C.Skin of the victim and food items at the scene
D.Only on metallic tool edges
Correct Answer: Skin of the victim and food items at the scene
Explanation:
Bite marks are frequently encountered on human skin (in assaults or sexual offenses) as well as on foodstuffs like cheese, chocolate, or apples left at scenes, both of which can preserve dental impressions for comparison.
Incorrect! Try again.
30Ear prints are most commonly recovered from which location at a burglary scene?
ear prints; nature and location of occurrence
Medium
A.The ceiling of the room
B.Doors and windows where the intruder listened
C.Loose soil in the garden
D.Metal safe hinges
Correct Answer: Doors and windows where the intruder listened
Explanation:
Ear prints are often deposited when an intruder presses an ear against a door or window to listen before entering. The secretions and skin contours of the outer ear leave a latent impression on such smooth surfaces.
Incorrect! Try again.
31Which anatomical features of the ear provide the individualizing detail used in ear print comparison?
ear prints; nature and location of occurrence
Medium
A.Helix, antihelix, tragus, and lobe contours
B.Middle ear ossicle positions
C.Cochlea and semicircular canals
D.Eardrum thickness and shape
Correct Answer: Helix, antihelix, tragus, and lobe contours
Explanation:
Ear print identification is based on the external ear structures—helix, antihelix, tragus, antitragus, and lobe—since these outer contours contact the surface and vary between individuals. Internal ear structures do not form the print.
Incorrect! Try again.
32A long, dark rubber mark left on a road when a driver brakes hard and the wheels lock is best classified as a:
tyre marks, skid marks and drag marks; their nature and location of occurrence
Medium
A.Yaw mark
B.Skid mark
C.Drag mark
D.Rolling impression
Correct Answer: Skid mark
Explanation:
Skid marks are produced when locked, non-rotating tyres slide over the road surface during hard braking, depositing rubber. They help estimate vehicle speed. Drag marks involve an object being pulled, and yaw marks come from sideways sliding.
Incorrect! Try again.
33At a scene where a body was pulled across the ground to a vehicle, the resulting marks on the soil would most likely be characterized as:
tyre marks, skid marks and drag marks; their nature and location of occurrence
Medium
A.Skid marks
B.Yaw marks
C.Drag marks
D.Tread impressions
Correct Answer: Drag marks
Explanation:
Drag marks are formed when an object or body is dragged across a surface, leaving parallel striations or disturbed material along the path. Skid and yaw marks are specifically tyre-related road phenomena.
Incorrect! Try again.
34While examining tyre impressions from a hit-and-run, an investigator notes the four tyres show two different tread patterns. This most likely indicates:
original and replaced tyre impressions
Medium
A.All tyres are original equipment
B.The vehicle has replaced (non-original) tyres on some wheels
C.The impressions were photographed incorrectly
D.The vehicle was travelling in reverse
Correct Answer: The vehicle has replaced (non-original) tyres on some wheels
Explanation:
Original tyres fitted by a manufacturer are usually a matching set. Differing tread patterns among the tyres indicate that one or more have been replaced, which itself becomes a useful individualizing feature when linking a vehicle.
Incorrect! Try again.
35In tyre tread nomenclature, the raised rubber portions that contact the road and provide grip are called:
tread nomenclature and indicator of wear and tear
Medium
A.Grooves
B.Shoulders only
C.Ribs (tread blocks)
D.Sipes
Correct Answer: Ribs (tread blocks)
Explanation:
The raised contact portions of a tyre tread are the ribs or tread blocks, which grip the road. Grooves are the recessed channels between them, sipes are fine slits within blocks, and shoulders are the outer tread edges.
Incorrect! Try again.
36Uneven wear appearing only on one edge (shoulder) of a tyre's tread most commonly indicates:
tread nomenclature and indicator of wear and tear
Medium
A.Reversed rotation direction
B.Improper wheel alignment
C.A brand-new tyre
D.Correct inflation pressure
Correct Answer: Improper wheel alignment
Explanation:
One-sided or shoulder wear typically results from misalignment (incorrect camber/toe). Such distinctive wear patterns can serve as individual characteristics helping to link a specific tyre to an impression.
Incorrect! Try again.
37Which of the following would be considered an individual characteristic rather than a class characteristic of a footwear impression?
class and individual characteristics of various impression evidences
Medium
A.The overall size of the shoe
B.The manufacturer's logo pattern
C.A specific cut or embedded stone in the sole
D.The tread design of the shoe model
Correct Answer: A specific cut or embedded stone in the sole
Explanation:
Individual characteristics are randomly acquired features—cuts, nicks, embedded debris—unique to one shoe. Tread design, size, and logo are class characteristics shared by all shoes of that make and model.
Incorrect! Try again.
38A tool mark examiner concludes a screwdriver made an impression at a scene. The unique microscopic striations along the tool's edge that allow this match are an example of:
class and individual characteristics of various impression evidences
Medium
A.Latent residues
B.Individual characteristics
C.Class characteristics
D.Accidental patent features
Correct Answer: Individual characteristics
Explanation:
The random microscopic striations formed during manufacture and use are individual characteristics unique to that tool, enabling a positive identification. Class characteristics (like tool width or type) only narrow down the group.
Incorrect! Try again.
39A crowbar used to force open a window frame leaves a mark where the tool was pressed and levered, compressing the wood. This is best described as which type of tool mark?
tool marks; their types, nature and location of occurrence
Medium
A.Cut mark only
B.Striated (sliding) mark
C.Impressed (compression) mark
D.Latent transfer mark
Correct Answer: Impressed (compression) mark
Explanation:
Impressed or compression marks form when a tool is pressed against a softer surface, leaving a negative image of the tool's shape. Striated marks form when a tool slides across a surface, producing parallel scratches.
Incorrect! Try again.
40When bolt cutters slide along and shear through a padlock shackle, the resulting parallel scratch pattern on the cut surface is classified as a:
tool marks; their types, nature and location of occurrence
Medium
A.Impressed mark
B.Striated (friction) mark
C.Plastic mould mark
D.Patent residue mark
Correct Answer: Striated (friction) mark
Explanation:
Striated marks are produced by the sliding or scraping action of a tool's edge, creating parallel striae that reflect microscopic imperfections of the blade. These striations are valuable for tool identification.
Incorrect! Try again.
41A forensic examiner recovers a shoeprint on a dusty tile that is only visible when the surface is illuminated with oblique lighting at a low angle. This impression contains no foreign material transferred to or from the shoe. How should this impression be most accurately classified?
classification of impressions on the basis of visual appearance
Hard
An impression that is not readily visible and requires special lighting or enhancement to be seen is termed latent. Since no material was deposited or removed and there is no depth, it is a two-dimensional latent impression, not a plastic (three-dimensional) or patent (readily visible) one.
Incorrect! Try again.
42Two footwear impressions are compared. Both share the same tread pattern, size, and manufacturer's logo, but one shows a distinctive cut across the heel and an embedded pebble void. Which conclusion is best supported?
class and individual characteristics of various impression evidences
Hard
A.Only class characteristics exist, so exclusion is impossible
B.Class characteristics match, and individual characteristics may permit identification to a single shoe
C.Individual characteristics match, confirming class origin only
D.Random wear cannot serve as an individualizing feature under any circumstance
Correct Answer: Class characteristics match, and individual characteristics may permit identification to a single shoe
Explanation:
Tread pattern, size, and logo are class characteristics shared by many shoes. The cut and embedded pebble are randomly acquired individual characteristics that can, if reproduced in the questioned impression, individualize the print to one specific shoe.
Incorrect! Try again.
43An investigator analyzes a trail of footwear impressions and measures a consistent stride length, a wide straddle, and a marked outward foot angle on the left side only. What is the most defensible forensic inference?
importance of gait pattern
Hard
A.Evidence that two different individuals produced the trail
B.A possible asymmetry or injury affecting the left limb, contributing to gait individuality
C.Proof that the person was carrying a heavy load on the right side
D.A definitive identification of the suspect by gait alone
Correct Answer: A possible asymmetry or injury affecting the left limb, contributing to gait individuality
Explanation:
Gait analysis examines stride length, straddle, and foot angle. A one-sided abnormality suggests a functional asymmetry or injury and adds individualizing value, but gait is class-level behavioral evidence and cannot alone provide positive identification.
Incorrect! Try again.
44At a collision scene, an examiner observes a skid mark that gradually darkens and narrows before abruptly ending, followed by a gap and then a gouge in the asphalt. What sequence of events is most consistent with these features?
tyre marks, skid marks and drag marks; their nature and location of occurrence
Hard
A.Tyre deflation causing progressive loss of tread contact
B.Braking with impending lock-up, becoming airborne, then metal contacting the road on landing
C.Continuous acceleration followed by a controlled stop
D.A drag mark from a stationary vehicle being towed
Correct Answer: Braking with impending lock-up, becoming airborne, then metal contacting the road on landing
Explanation:
A darkening, narrowing skid indicates increasing braking and weight transfer; an abrupt end with a gap suggests the vehicle became airborne; the subsequent gouge indicates a hard metal component striking the road surface on landing.
Incorrect! Try again.
45During examination of a vehicle involved in a hit-and-run, three tyres match the OEM specification while one is a different brand with a mismatched tread depth. Why is this forensically significant?
original and replaced tyre impressions
Hard
A.It proves the vehicle was recently manufactured
B.The replaced tyre may leave a distinguishable track, aiding differentiation of individual wheel positions
C.All four impressions will be identical regardless of the replacement
D.The replaced tyre eliminates the vehicle as a suspect
Correct Answer: The replaced tyre may leave a distinguishable track, aiding differentiation of individual wheel positions
Explanation:
A replaced (non-original) tyre with a different pattern or wear will produce a distinguishable impression, allowing examiners to identify wheel positions and strengthen association of a specific vehicle with the scene.
Incorrect! Try again.
46A tyre impression shows shallow shoulder ribs but relatively deeper central grooves, with feathering visible along one edge of the tread blocks. What condition is most strongly indicated?
tread nomenclature and indicator of wear and tear
Hard
A.Over-inflation causing exclusive centre wear
B.Correct inflation with balanced wear across the tread
C.Misalignment causing uneven shoulder wear and edge feathering
D.Fresh tread with no measurable wear indicators
Correct Answer: Misalignment causing uneven shoulder wear and edge feathering
Explanation:
Feathering along tread block edges and uneven shoulder wear are classic indicators of wheel misalignment (toe error). Over-inflation produces central wear; under-inflation produces shoulder wear on both edges, so the described asymmetric pattern points to misalignment.
Incorrect! Try again.
47In cheiloscopy, an examiner classifies a lip print showing grooves that branch in a Y-shape across the vermilion border. Under the Suzuki and Tsuchihashi classification, which type does this correspond to?
lip prints; their nature and location
Hard
A.Type V (undetermined pattern)
B.Type I (clear vertical grooves)
C.Type III (branched grooves)
D.Type II (partial-length vertical grooves)
Correct Answer: Type III (branched grooves)
Explanation:
In the Suzuki–Tsuchihashi classification, Type I are complete vertical grooves, Type I' partial vertical, Type II branched (Y-shaped), and Type IV reticular. A Y-shaped branching groove corresponds to the branched type (commonly cited as Type III/branched in many texts).
Incorrect! Try again.
48A pathologist examines a bite mark exhibiting a central area of ecchymosis surrounded by two opposing arches with abrasions. Which factor most limits the evidentiary reliability of matching this mark to a suspect's dentition?
bite marks; nature, types and location of occurrence
Hard
A.The location of the bite on the victim's forearm
B.The presence of two dental arches in the mark
C.The photographic documentation using a scale
D.Skin's elasticity and distortion during and after biting
Correct Answer: Skin's elasticity and distortion during and after biting
Explanation:
Human skin is elastic and non-rigid; it distorts during biting and heals/changes afterward, introducing significant variability. This distortion is the primary reason bite mark identification has been heavily criticized for reliability, more than arch count, location, or documentation.
Incorrect! Try again.
49An ear print is lifted from a window pane at a burglary scene. Which combination of features contributes class-level rather than individualizing information to the comparison?
ear prints; nature and location of occurrence
Hard
A.Idiosyncratic tragus deformity from prior trauma
B.General shape and overall size of the helix and antihelix
C.Specific creases, notches, and unique cartilage ridge details
D.Precise position of a healed piercing scar
Correct Answer: General shape and overall size of the helix and antihelix
Explanation:
General shape and size of the ear are shared among many individuals (class characteristics). Specific creases, scars, piercings, and cartilage details are randomly acquired or unique, providing individualizing information.
Incorrect! Try again.
50A forced entry shows a striated mark on a door strike plate produced by a screwdriver used as a lever. To individualize the tool, the examiner must primarily compare which feature set?
tool marks; their types, nature and location of occurrence
Hard
A.The overall width of the screwdriver blade only
B.The microscopic striations reflecting the tool edge's unique imperfections
C.The compressed impression of the tool tip shape alone
D.The manufacturer's brand stamped on the tool
Correct Answer: The microscopic striations reflecting the tool edge's unique imperfections
Explanation:
Striated tool marks record microscopic imperfections along the tool's working edge, which are individual characteristics acquired during manufacture and use. Blade width and tip shape are class characteristics; comparison of striations enables individualization.
Incorrect! Try again.
51At a scene, investigators recover: (1) a shoeprint in soft mud, (2) a fingerprint dusted on glass, and (3) a chisel mark on a wooden window frame. Which statement correctly categorizes the dimensional nature of these three?
types of impression evidences found at crime scene
Hard
A.All three are three-dimensional impressions
B.Only (2) is a true impression evidence
C.(1) and (3) are three-dimensional; (2) is two-dimensional
D.(1) is two-dimensional; (2) and (3) are three-dimensional
Correct Answer: (1) and (3) are three-dimensional; (2) is two-dimensional
Explanation:
A shoeprint in mud and a chisel mark in wood have measurable depth (three-dimensional). A dusted fingerprint on glass has negligible depth and is treated as a two-dimensional impression.
Incorrect! Try again.
52An examiner must distinguish a barefoot impression from a sock-clad foot impression at a scene. Which feature would most reliably confirm a bare foot rather than a sock?
foot and footwear impressions; their nature and location of occurrence
Hard
A.Ridge detail from the friction skin of the sole and toes
B.Presence of a heel and arch region
C.The general outline and length of the foot
D.Uniform pressure distribution across the impression
Correct Answer: Ridge detail from the friction skin of the sole and toes
Explanation:
Friction ridge detail (dermatoglyphics) of the sole is unique to a bare foot and cannot be transmitted through a sock, which would instead show fabric weave. Outline, heel, arch, and pressure are non-discriminating between the two.
Incorrect! Try again.
53A reconstructionist differentiates a yaw mark from a straight skid mark. Which characteristic uniquely identifies a yaw mark?
tyre marks, skid marks and drag marks; their nature and location of occurrence
Hard
A.Uniform dark deposition along a straight path
B.Diagonal striations across the mark caused by the tyre slipping sideways while rolling
C.Parallel gouges from a locked, non-rotating wheel
D.An abrupt start with immediate maximum darkness
Correct Answer: Diagonal striations across the mark caused by the tyre slipping sideways while rolling
Explanation:
Yaw marks occur when a tyre rotates while sliding laterally (cornering), producing characteristic diagonal (cross-hatch) striations across the mark. Locked-wheel skids show longitudinal striations or uniform smearing without the diagonal pattern.
Incorrect! Try again.
54Which principle most fundamentally underlies the evidentiary value of all impression evidence in forensic science?
introduction to impression evidences
Hard
A.The principle of superposition of geological layers
D.Locard's exchange principle governing transfer and reproduction of contact features
Correct Answer: Locard's exchange principle governing transfer and reproduction of contact features
Explanation:
Locard's exchange principle—that contact between two surfaces results in transfer—underlies impression evidence, since impressions form when one object contacts another and reproduces its surface features. The other options are unrelated concepts.
Incorrect! Try again.
55An examiner classifies bite marks by mechanism. A bite showing tearing, avulsion of tissue, and irregular margins most likely represents which type?
bite marks; nature, types and location of occurrence
Hard
A.A hesitation bite with light contact
B.A suck mark without dental impression
C.A double bite showing overlapping arches
D.An avulsive/violent bite with tissue removal
Correct Answer: An avulsive/violent bite with tissue removal
Explanation:
Avulsive bites involve significant force with tearing and removal (avulsion) of tissue, producing irregular margins. Hesitation and suck marks lack tissue loss; a double bite shows arch overlap without necessarily avulsing tissue.
Incorrect! Try again.
56A negative impression and a positive impression of the same object are compared. Which statement correctly describes their relationship?
classification of impressions on the basis of visual appearance
Hard
A.Negative and positive impressions cannot originate from the same object
B.The negative shows recessed detail where the object protruded, mirroring the positive's raised features
C.The positive is always two-dimensional while the negative is three-dimensional
D.Both show identical raised and recessed features in the same orientation
Correct Answer: The negative shows recessed detail where the object protruded, mirroring the positive's raised features
Explanation:
A negative (molded) impression is the inverse of the object's surface—raised areas of the object become recesses in the impression and vice versa. A positive replicates the object's actual relief; the two are complementary inverses.
Incorrect! Try again.
57During a footwear comparison, the examiner finds matching class characteristics but only one small, poorly reproduced individual feature in the questioned print. What is the most appropriate conclusion?
class and individual characteristics of various impression evidences
Hard
A.A qualified association—consistent with, but insufficient for positive identification
B.A definitive exclusion because only one feature is present
C.A positive identification to the exclusion of all other shoes
D.No opinion can be offered because class features matched
Correct Answer: A qualified association—consistent with, but insufficient for positive identification
Explanation:
One poorly reproduced individual characteristic supports association but does not meet the threshold for positive identification, which requires sufficient reproducible individual detail. The correct conclusion is a qualified/limited association, not exclusion or certainty.
Incorrect! Try again.
58In tread nomenclature, the continuous circumferential raised portions are called ribs, and the transverse recesses are grooves. If a tyre impression shows the tread wear indicator bars flush with the tread blocks, what does this signify?
tread nomenclature and indicator of wear and tear
Hard
A.The tyre has worn to its minimum legal tread depth
B.The tyre is over-inflated
C.The impression was made by the sidewall, not the tread
D.The tyre is brand new with full tread
Correct Answer: The tyre has worn to its minimum legal tread depth
Explanation:
Tread wear indicators (wear bars) are moulded at a set minimum depth (commonly 1.6 mm). When they become flush with the surrounding tread blocks, the tyre has worn to its minimum legal/safe depth and should be replaced.
Incorrect! Try again.
59A latent lip print is suspected on a drinking glass at a scene. Which statement about the nature and persistence of lip prints is most accurate?
lip prints; their nature and location
Hard
A.Lip prints can only be recovered from porous paper surfaces
B.Lip prints change completely every few weeks like a healing wound
C.Lip groove patterns are considered stable and individual, but latent prints require sebaceous/labial secretions to be recoverable
D.Lip prints are identical among first-degree relatives
Correct Answer: Lip groove patterns are considered stable and individual, but latent prints require sebaceous/labial secretions to be recoverable
Explanation:
The groove pattern of the lips is regarded as stable through life and individual (cheiloscopy). Latent lip prints on surfaces such as glass depend on transferred secretions/residue for visualization and recovery; they are not limited to porous surfaces nor shared among relatives.
Incorrect! Try again.
60Tool marks are broadly divided into impressed (compression) and striated (friction) marks. A padlock hasp cut by a bolt cutter shows two opposing pinched surfaces with fine parallel lines running perpendicular to the cut face. How should these be classified and used?
tool marks; their types, nature and location of occurrence
Hard
A.Purely impressed marks with only class value
B.Neither type, since cutting tools leave no reproducible detail
C.Combination marks—compression from the jaws with striations from blade movement, usable for individualization
D.Purely striated marks bearing no class characteristics
Correct Answer: Combination marks—compression from the jaws with striations from blade movement, usable for individualization
Explanation:
Bolt cutters produce compression (impressed) marks as the jaws pinch the hasp and striations as the blades shear and slide across the metal. Such combination marks carry both class and individual detail and can support individualization of the specific tool.
Incorrect! Try again.
Did this save you a night before the exam?
LPU Notes is free, and it stays free. Ads cover part of the server bill.
The rest comes out of a student's own pocket: the domain, the storage,
and keeping the site up through the weeks everyone needs it at once.
The payment button didn't load. An ad blocker or a filtered network is the usual reason.
to try again.
Nothing here is ever locked, and nothing unlocks. Chip in only if it was worth it.
What it pays for →