1Which type of tractor is designed mainly for working between rows of crops?
Tractor classifications and economics
Easy
A.Industrial tractor
B.Garden tractor
C.Crawler tractor with a fully enclosed track system
D.Row-crop tractor
Correct Answer: Row-crop tractor
Explanation:
A row-crop tractor provides suitable clearance and maneuverability for operations between crop rows.
Incorrect! Try again.
2Which tractor cost remains payable even when the tractor is not being used?
Tractor classifications and economics
Easy
A.Fuel cost
B.Fixed cost
C.Repair cost
D.Lubricant cost based on the number of hours worked
Correct Answer: Fixed cost
Explanation:
Fixed costs, such as depreciation, interest, and insurance, occur regardless of annual tractor use.
Incorrect! Try again.
3Which of the following is a variable cost of tractor operation?
Tractor classifications and economics
Easy
A.Depreciation
B.Interest charged on the original tractor investment
C.Fuel cost
D.Insurance
Correct Answer: Fuel cost
Explanation:
Fuel cost changes with the number of hours the tractor is operated, so it is a variable cost.
Incorrect! Try again.
4What is the main purpose of a tractor air cleaner?
Air cleaning system
Easy
A.To remove dust from intake air
B.To regulate the temperature of coolant circulating through the radiator
C.To cool the engine oil
D.To increase fuel pressure
Correct Answer: To remove dust from intake air
Explanation:
The air cleaner removes dust and other particles before air enters the engine cylinders.
Incorrect! Try again.
5Which air-cleaning device commonly uses a pool of oil to trap dust?
Air cleaning system
Easy
A.Fuel sediment bowl
B.Oil-bath cleaner
C.Dry-element cleaner
D.Paper filter fitted inside the hydraulic oil reservoir
Correct Answer: Oil-bath cleaner
Explanation:
An oil-bath air cleaner passes incoming air over oil, which captures much of the dust.
Incorrect! Try again.
6A clogged air cleaner most directly reduces the supply of what to the engine?
Air cleaning system
Easy
A.Pressurized lubricant delivered to the crankshaft bearings
B.Coolant
C.Fuel
D.Air
Correct Answer: Air
Explanation:
A clogged air cleaner restricts airflow into the engine and can reduce engine performance.
Incorrect! Try again.
7Which component stores fuel on a tractor?
Fuel supply system
Easy
A.Oil sump
B.Fuel tank
C.Radiator
D.Hydraulic cylinder mounted near the tractor implement linkage
Correct Answer: Fuel tank
Explanation:
The fuel tank stores the fuel required for engine operation.
Incorrect! Try again.
8What is the main function of a fuel filter?
Fuel supply system
Easy
A.To ignite the fuel
B.To maintain the temperature of water flowing around the cylinders
C.To remove fuel impurities
D.To cool the fuel
Correct Answer: To remove fuel impurities
Explanation:
The fuel filter removes dirt and other contaminants before fuel reaches the engine.
Incorrect! Try again.
9In a diesel tractor engine, which component delivers fuel into the combustion chamber?
Fuel supply system
Easy
A.Air-cleaner element located ahead of the intake manifold
B.Clutch
C.Radiator
D.Injector
Correct Answer: Injector
Explanation:
The injector sprays finely atomized diesel fuel into the combustion chamber.
Incorrect! Try again.
10What is the main purpose of the engine cooling system?
Cooling system
Easy
A.To lubricate transmission gears
B.To remove dust particles from air before combustion begins
C.To increase fuel pressure
D.To reduce excess engine heat
Correct Answer: To reduce excess engine heat
Explanation:
The cooling system removes excess heat and helps maintain a suitable engine operating temperature.
Incorrect! Try again.
11Which cooling-system component transfers heat from the coolant to the surrounding air?
Cooling system
Easy
A.Oil filter
B.Fuel pump
C.Radiator
D.Hydraulic control valve connected to the implement lift circuit
Correct Answer: Radiator
Explanation:
The radiator releases heat from the hot coolant into the surrounding air.
Incorrect! Try again.
12What does the thermostat control in a liquid-cooled tractor engine?
Cooling system
Easy
A.Coolant flow
B.Fuel injection timing
C.The filtration of dust from all air entering the engine
D.Clutch engagement
Correct Answer: Coolant flow
Explanation:
The thermostat regulates coolant flow according to engine temperature.
Incorrect! Try again.
13Which fluid property allows a tractor hydraulic system to transmit force?
Hydraulic system
Easy
A.The ability to evaporate rapidly whenever operating pressure increases
B.Relative incompressibility
C.Low density
D.High volatility
Correct Answer: Relative incompressibility
Explanation:
Hydraulic fluid is nearly incompressible, allowing it to transmit pressure and force effectively.
Incorrect! Try again.
14Which hydraulic component converts fluid pressure into linear motion?
Hydraulic system
Easy
A.Cooling fan
B.Fuel injector
C.Hydraulic cylinder
D.Dry-type air cleaner fitted with a replaceable paper element
Correct Answer: Hydraulic cylinder
Explanation:
A hydraulic cylinder uses pressurized fluid to move a piston in a straight line.
Incorrect! Try again.
15What is the function of a hydraulic pump in a tractor?
Hydraulic system
Easy
A.To circulate hydraulic fluid
B.To ignite diesel fuel
C.To cool intake air
D.To separate dust from air by passing it through an oil bath
Correct Answer: To circulate hydraulic fluid
Explanation:
The hydraulic pump creates fluid flow for operating cylinders, motors, and other hydraulic devices.
Incorrect! Try again.
16What is the primary purpose of engine lubrication?
Lubrication system
Easy
A.To control the quantity of diesel injected during each power stroke
B.To reduce friction and wear
C.To clean incoming air
D.To increase tire grip
Correct Answer: To reduce friction and wear
Explanation:
Lubrication forms a protective film between moving parts, reducing friction and wear.
Incorrect! Try again.
17Where is engine lubricating oil commonly stored in a wet-sump system?
Lubrication system
Easy
A.In the fuel tank
B.In the crankcase sump
C.In the radiator
D.In a separate pressurized cylinder mounted beside the transmission
Correct Answer: In the crankcase sump
Explanation:
In a wet-sump system, lubricating oil collects in the sump at the bottom of the crankcase.
Incorrect! Try again.
18What does an engine oil filter remove from lubricating oil?
Lubrication system
Easy
A.Heat
B.Solid contaminants
C.All chemical additives included by the manufacturer to improve oil performance
D.Water vapor
Correct Answer: Solid contaminants
Explanation:
The oil filter traps dirt, metal particles, and other solid contaminants carried by the oil.
Incorrect! Try again.
19What is the main function of a tractor transmission?
Transmission system
Easy
A.To filter diesel fuel
B.To provide different speed and torque ratios
C.To clean the intake air before it reaches the combustion chamber
D.To remove engine heat
Correct Answer: To provide different speed and torque ratios
Explanation:
The transmission changes speed and torque to suit different tractor operations.
Incorrect! Try again.
20Which component allows the tractor operator to connect or disconnect engine power from the transmission?
Transmission system
Easy
A.Clutch
B.Injector
C.Radiator
D.Hydraulic relief valve used to limit maximum system pressure
Correct Answer: Clutch
Explanation:
The clutch engages or disengages the flow of power from the engine to the transmission.
Incorrect! Try again.
21A farmer needs a tractor mainly for inter-row cultivation in a tall cotton crop. Which tractor type is most suitable?
Tractor classifications and economics
Medium
A.Compact garden tractor
B.Crawler construction tractor
C.High-clearance row-crop tractor
D.Low-clearance orchard tractor
Correct Answer: High-clearance row-crop tractor
Explanation:
A row-crop tractor provides the ground clearance and adjustable wheel spacing needed to travel between crop rows without damaging plants.
Incorrect! Try again.
22A tractor costs $900,000, has a salvage value of $150,000, and an economic life of 10 years. Using straight-line depreciation, what is its annual depreciation?
Tractor classifications and economics
Medium
A.$105,000 per year
B.$75,000 per year
C.$60,000 per year
D.$90,000 per year
Correct Answer: $75,000 per year
Explanation:
Annual depreciation is .
Incorrect! Try again.
23A tractor has fixed costs of $240,000 per year and variable costs of $600 per operating hour. If it is used for 600 hours annually, what is its total cost per hour?
Tractor classifications and economics
Medium
A.$1,200 per hour
B.$800 per hour
C.$1,000 per hour
D.$900 per hour
Correct Answer: $1,000 per hour
Explanation:
Fixed cost per hour is . Adding the $600 variable cost gives $1,000 per hour.
Incorrect! Try again.
24A tractor operating in a dusty field shows black exhaust smoke and reduced power, while the fuel system is functioning normally. What should be checked first?
Air cleaning system
Medium
A.Hydraulic oil level
B.Radiator cap pressure
C.Air cleaner restriction
D.Clutch pedal clearance
Correct Answer: Air cleaner restriction
Explanation:
A restricted air cleaner reduces oxygen supply, causing incomplete combustion, black smoke, and loss of engine power.
Incorrect! Try again.
25Why is a pre-cleaner fitted ahead of the main air filter on tractors used in very dusty conditions?
Air cleaning system
Medium
A.To remove larger dust particles first
B.To increase intake-air temperature first
C.To add fuel vapour to the air first
D.To raise intake-manifold pressure first
Correct Answer: To remove larger dust particles first
Explanation:
The pre-cleaner separates coarse dust before air reaches the main element, reducing filter loading and extending service intervals.
Incorrect! Try again.
26After a dry-type air filter element is replaced, the restriction indicator still shows excessive restriction. Which fault is most likely?
Air cleaning system
Medium
A.Blocked air-intake pipe
B.Weak radiator fan belt
C.Low transmission oil
D.Worn hydraulic pump
Correct Answer: Blocked air-intake pipe
Explanation:
If a clean element does not reduce restriction, an obstruction or collapsed section elsewhere in the intake passage is likely.
Incorrect! Try again.
27A diesel tractor runs unevenly immediately after its fuel filter is replaced. What is the most likely corrective action?
Fuel supply system
Medium
A.Adjust the clutch free travel
B.Drain the hydraulic reservoir
C.Bleed air from the fuel system
D.Tighten the radiator fan belt
Correct Answer: Bleed air from the fuel system
Explanation:
Opening the fuel circuit during filter replacement can admit air, which interrupts uniform fuel delivery until the system is bled.
Incorrect! Try again.
28A diesel engine produces persistent black smoke when heavily loaded. Which fuel-system condition is a likely cause?
Fuel supply system
Medium
A.Weak transfer pump only
B.Blocked tank vent only
C.Excessive fuel delivery
D.Air trapped in the line
Correct Answer: Excessive fuel delivery
Explanation:
Fuel delivery beyond the available air supply causes incomplete combustion and black exhaust smoke under load.
Incorrect! Try again.
29A tractor loses power after operating for an hour, but regains power soon after the fuel-tank cap is loosened. What is the probable fault?
Fuel supply system
Medium
A.Advanced injection timing
B.Stuck engine thermostat
C.Leaking injector nozzle
D.Blocked fuel-tank vent
Correct Answer: Blocked fuel-tank vent
Explanation:
A blocked vent allows vacuum to develop in the tank, restricting fuel flow; loosening the cap temporarily restores ventilation.
Incorrect! Try again.
30A tractor overheats during heavy work, and its lower radiator hose remains cool while the engine is hot. Which component is most likely stuck closed?
Cooling system
Medium
A.Radiator pressure cap
B.Cab-heater control
C.Coolant recovery valve
D.Engine thermostat
Correct Answer: Engine thermostat
Explanation:
A thermostat stuck closed prevents hot coolant from circulating through the radiator, leaving the lower hose relatively cool.
Incorrect! Try again.
31Why does a pressurized cooling system permit an engine to operate at a higher coolant temperature without boiling?
Cooling system
Medium
A.Pressure increases the fan rotation speed
B.Pressure lowers the coolant freezing point
C.Pressure reduces the engine compression ratio
D.Pressure raises the coolant boiling point
Correct Answer: Pressure raises the coolant boiling point
Explanation:
Increasing system pressure raises the coolant's boiling point, allowing more heat to be carried without vapour formation.
Incorrect! Try again.
32A radiator core is clean and coolant level is correct, but the tractor overheats mainly at low engine speed. Which condition best explains this pattern?
Cooling system
Medium
A.Restricted hydraulic return line
B.Overfilled engine crankcase
C.Loose water-pump drive belt
D.Excessive clutch free travel
Correct Answer: Loose water-pump drive belt
Explanation:
A slipping belt can reduce fan and water-pump speed, especially at low engine speed, causing inadequate airflow and coolant circulation.
Incorrect! Try again.
33A hydraulic cylinder has a piston area of and receives oil at . Ignoring losses, what force can it exert?
Hydraulic system
Medium
A.
B.
C.
D.
Correct Answer:
Explanation:
Using , the area is , so .
Incorrect! Try again.
34A three-point hitch lifts normally when cold but becomes slow after the hydraulic oil warms. Which fault is most likely?
Hydraulic system
Medium
A.Tight clutch adjustment
B.Stuck engine thermostat
C.Excessive internal leakage
D.Blocked fuel return line
Correct Answer: Excessive internal leakage
Explanation:
Warm oil is less viscous, so leakage through worn pump or valve clearances increases and reduces available hydraulic flow.
Incorrect! Try again.
35An implement rises in jerks and the hydraulic pump makes a whining sound. The reservoir oil level is low. What is the most likely immediate cause?
Hydraulic system
Medium
A.Mechanical locking of the hitch
B.Overcooling of the hydraulic oil
C.Air entering the pump inlet
D.Excess pressure at the cylinder
Correct Answer: Air entering the pump inlet
Explanation:
Low oil can expose the suction inlet, allowing air into the pump and causing noise, irregular flow, and jerky lifting.
Incorrect! Try again.
36An engine's oil-pressure warning lamp comes on at hot idle but goes off when speed increases. The oil level is correct. Which condition is most likely?
Lubrication system
Medium
A.Excessive bearing clearance
B.Blocked radiator air passage
C.Insufficient clutch clearance
D.Restricted injector return line
Correct Answer: Excessive bearing clearance
Explanation:
Large bearing clearances allow warm, low-viscosity oil to escape faster, reducing pressure most noticeably at idle.
Incorrect! Try again.
37Why is a multigrade oil such as SAE 15W-40 often preferred for a tractor used across cold mornings and hot afternoons?
Lubrication system
Medium
A.It prevents all oil oxidation permanently
B.It increases fuel cetane during operation
C.It flows cold yet retains hot viscosity
D.It eliminates the need for oil filters
Correct Answer: It flows cold yet retains hot viscosity
Explanation:
Multigrade oil provides easier circulation during cold starting while maintaining adequate viscosity and film strength at operating temperature.
Incorrect! Try again.
38A tractor engine's oil level gradually rises and the oil smells strongly of diesel fuel. Which fault best explains the observation?
Lubrication system
Medium
A.Air bypassing the intake filter
B.Fuel leaking into the crankcase
C.Grease entering the final drive
D.Coolant escaping through the cap
Correct Answer: Fuel leaking into the crankcase
Explanation:
Fuel leakage from an injector or fuel-pump component can dilute the lubricant, raising its apparent level and reducing its viscosity.
Incorrect! Try again.
39A tractor engine develops at . If the selected transmission ratio reduces axle speed to and losses are ignored, what axle torque is produced approximately?
Transmission system
Medium
A.
B.
C.
D.
Correct Answer:
Explanation:
At , angular speed is about , so .
Incorrect! Try again.
40A tractor slows under load while engine speed rises, and a burning smell comes from the clutch housing. What is the most likely fault?
Transmission system
Medium
A.Differential lock engaged
B.Clutch plate slipping
C.Final drive over-reduction
D.Gear selector interlocked
Correct Answer: Clutch plate slipping
Explanation:
A slipping clutch fails to transmit full engine torque, producing reduced travel speed, increased engine speed, and frictional heat.
Incorrect! Try again.
41Tractor A costs $48,000, has a salvage value of $12,000 after 8 years, annual insurance and housing costs of $1,200, and variable costs of $18/h. Tractor B costs $68,000, has a salvage value of $20,000 after 8 years, annual insurance and housing costs of $1,480, and variable costs of $13/h. Using straight-line depreciation and annual interest of 8% on average investment, at what annual use are their total costs equal?
Tractor classifications and economics
Hard
A.500 h/year
B.640 h/year
C.580 h/year
D.420 h/year
Correct Answer: 580 h/year
Explanation:
Annual fixed costs are $8,100 for A and $11,000 for B. Equating costs gives , so h/year.
Incorrect! Try again.
42A farm must perform sustained primary tillage on low-bearing-strength soil where drawbar pull, flotation, and low wheel slip are more important than transport speed or minimum turning radius. Which tractor classification is most appropriate?
Tractor classifications and economics
Hard
A.Front-wheel-assist tractor with small steering tires
An equal-wheel four-wheel-drive tractor distributes weight and tractive effort over all four large tires, improving flotation and drawbar performance on weak soil.
Incorrect! Try again.
43A tractor will be used for 500 h/year. Ownership entails $9,000/year fixed cost, $16/h operating cost, and $2,000/year expected timeliness loss. Hiring costs $32/h and is expected to cause $6,000/year in timeliness loss. Which decision minimizes the annual relevant cost?
Tractor classifications and economics
Hard
A.Hire, saving $1,000 per year
B.Hire, saving $3,000 per year
C.Own, saving $3,000 per year
D.Own, saving $5,000 per year
Correct Answer: Own, saving $3,000 per year
Explanation:
Ownership costs . Hiring costs , so ownership saves $3,000.
Incorrect! Try again.
44A two-stage tractor air cleaner receives 250 g/h of dust. The primary element removes 92% of entering dust, and the safety element removes 80% of the dust that reaches it. How much dust reaches the engine?
Air cleaning system
Hard
A.20 g/h
B.4 g/h
C.16 g/h
D.2 g/h
Correct Answer: 4 g/h
Explanation:
Dust passing both stages is g/h. The combined efficiency is therefore 98.4%.
Incorrect! Try again.
45An engine's air-restriction indicator enters the red zone only at rated load. Replacing both filter elements does not change the reading, but temporarily removing a debris-covered precleaner inlet returns restriction to normal. Which fault best explains the observations?
Air cleaning system
Hard
A.Failure of the exhaust manifold gasket
B.Blockage at the precleaner air inlet
C.Leakage downstream of the safety element
D.Excess clearance in the intake valves
Correct Answer: Blockage at the precleaner air inlet
Explanation:
A restriction upstream of new filter elements still limits airflow. Restoring normal restriction by opening the precleaner inlet isolates the blockage to that location.
Incorrect! Try again.
46A four-cylinder, four-stroke diesel operates at 1,800 rpm. Each cylinder receives of fuel per injection, and fuel density is . Neglecting return flow, what is the fuel delivery rate?
Fuel supply system
Hard
A.21.77 kg/h
B.5.44 kg/h
C.8.64 kg/h
D.10.89 kg/h
Correct Answer: 10.89 kg/h
Explanation:
There are injections/min. Delivery is L/min, giving kg/h.
Incorrect! Try again.
47A mechanical governor has a no-load speed of 2,200 rpm and a full-load speed of 2,000 rpm at a fixed control setting. If the governor characteristic is linear, approximately what fraction of rated torque is being produced when speed stabilizes at 2,100 rpm?
Fuel supply system
Hard
A.25%
B.75%
C.50%
D.100%
Correct Answer: 50%
Explanation:
The total governor droop is 200 rpm. A 100 rpm drop from no-load speed represents of the full-load torque.
Incorrect! Try again.
48After an injection-pump overhaul, a diesel exhibits difficult cold starting, black exhaust under load, reduced power, and unusually high exhaust temperature. Injector opening pressures and air supply are correct. Which adjustment error is most consistent with all symptoms?
Retarded injection shifts combustion later into the expansion stroke, causing poor starting, incomplete combustion, reduced useful work, and elevated exhaust temperature.
Incorrect! Try again.
49A tractor engine transfers 45 kW of heat to its coolant. Coolant specific heat is , and its temperature rise through the engine is limited to . What minimum coolant mass-flow rate is required?
Cooling system
Hard
A.1.48 kg/s
B.0.84 kg/s
C.2.37 kg/s
D.1.18 kg/s
Correct Answer: 1.48 kg/s
Explanation:
Using , the required flow is kg/s.
Incorrect! Try again.
50A cold tractor engine rapidly overheats after loading. Pump circulation has been independently verified, the radiator core is externally clean, and the radiator remains relatively cool while the cylinder-head temperature rises sharply. Which failure is most likely?
Cooling system
Hard
A.Temperature sender shorted to the chassis
B.Thermostat stuck in the closed position
C.Fan blades installed at excessive pitch
D.Pressure cap stuck in the open position
Correct Answer: Thermostat stuck in the closed position
Explanation:
A closed thermostat traps hot coolant in the engine and prevents substantial flow through the radiator, producing a hot engine with a comparatively cool radiator.
Incorrect! Try again.
51Two identical cooling systems use the same coolant and pressure-cap rating. One operates at sea level and the other at high altitude. Before either cap opens, which statement about coolant boiling temperature is correct?
Cooling system
Hard
A.It is higher at altitude because air density is lower
B.It is higher at sea level because absolute pressure is higher
C.It is identical because cap gauge pressure is identical
D.It is lower at sea level because radiator airflow is greater
Correct Answer: It is higher at sea level because absolute pressure is higher
Explanation:
A cap controls pressure above local atmospheric pressure. Higher sea-level atmospheric pressure therefore produces higher coolant absolute pressure and a higher boiling temperature.
Incorrect! Try again.
52A double-acting hydraulic cylinder has an 80 mm bore and a 45 mm rod. It operates at 16 MPa with a mechanical efficiency of 90%. Neglecting back pressure, what are its approximate extension and retraction forces?
Hydraulic system
Hard
A.49.5 kN extension and 72.4 kN retraction
B.72.4 kN extension and 49.5 kN retraction
C.80.4 kN extension and 55.0 kN retraction
D.72.4 kN extension and 57.8 kN retraction
Correct Answer: 72.4 kN extension and 49.5 kN retraction
Explanation:
Extension uses the full piston area, while retraction uses the annular area. Applying gives approximately 72.4 kN and 49.5 kN.
Incorrect! Try again.
53A control valve is held against the end stop, causing 12 L/min of oil to pass continuously across an 18 MPa relief valve. Approximately how much hydraulic power is converted into heat?
Hydraulic system
Hard
A.3.6 kW
B.5.0 kW
C.6.5 kW
D.2.4 kW
Correct Answer: 3.6 kW
Explanation:
Hydraulic power is W, so about 3.6 kW becomes heat.
Incorrect! Try again.
54During moldboard plowing with draft control engaged, the tractor enters a compacted patch and lower-link draft force rises above the selected value. What should a correctly adjusted system do first?
Hydraulic system
Hard
A.Increase engine speed without changing depth
B.Shift the transmission into a higher ratio
C.Lower the implement to increase wheel loading
D.Raise the implement to reduce draft demand
Correct Answer: Raise the implement to reduce draft demand
Explanation:
Draft control responds to excessive sensed draft by slightly raising the implement, reducing working depth and restoring draft toward the selected value.
Incorrect! Try again.
55Oil pressure is normal immediately after a cold start but falls below specification at all engine speeds after the oil reaches operating temperature. The correct oil grade and oil level are confirmed, and the pressure gauge is accurate. Which condition is most likely?
Lubrication system
Hard
A.Restricted crankcase ventilation at rated speed
B.Oil-filter bypass valve stuck fully closed
C.Excessive spring force in the pressure-relief valve
D.Excessive main or connecting-rod bearing clearance
Correct Answer: Excessive main or connecting-rod bearing clearance
Explanation:
As oil warms and viscosity falls, excessive bearing clearance permits high leakage flow, preventing the pump from maintaining normal gallery pressure.
Incorrect! Try again.
56A full-flow oil filter becomes severely restricted while the engine is operating at rated load. If the filter bypass valve functions correctly, what is the immediate system response?
Lubrication system
Hard
A.Unfiltered oil bypasses the element to maintain flow
B.Filtered oil reverses through the element to clean it
C.Oil flow stops until the filter element cools
D.The relief valve sends all pump output to the sump
Correct Answer: Unfiltered oil bypasses the element to maintain flow
Explanation:
The bypass valve opens when filter differential pressure becomes excessive. Lubrication flow is preserved, although some oil reaches the bearings without filtration.
Incorrect! Try again.
57Replacing the specified SAE 10W-30 oil with SAE 20W-50 raises indicated oil pressure, but bearing temperatures also rise during heavy operation. Which interpretation is technically sound?
B.Higher pressure proves that bearing oil flow increased
C.Higher viscosity may raise pressure while reducing flow
D.Higher bearing temperature proves the relief valve closed
Correct Answer: Higher viscosity may raise pressure while reducing flow
Explanation:
A more viscous oil can increase measured pressure while restricting flow through passages and bearings. It can also increase viscous friction and operating temperature.
Incorrect! Try again.
58A tractor engine runs at 2,100 rpm through an overall transmission reduction of 35:1. The driven-wheel rolling radius is 0.75 m, and wheel slip is 12%. What is the approximate actual travel speed?
Transmission system
Hard
A.16.96 km/h
B.13.20 km/h
C.19.28 km/h
D.14.93 km/h
Correct Answer: 14.93 km/h
Explanation:
Wheel speed is rpm. The theoretical speed is 16.96 km/h, so actual speed is km/h.
Incorrect! Try again.
59An engine produces 140 N·m through a 4:1 gearbox and a 5:1 final drive. Gearbox efficiency is 95%, and final-drive efficiency is 92%. Neglecting differential losses, what torque reaches the axle?
Transmission system
Hard
A.2,447 N·m
B.2,576 N·m
C.2,800 N·m
D.2,128 N·m
Correct Answer: 2,447 N·m
Explanation:
Axle torque is N·m. Both speed reductions and both stage efficiencies must be included.
Incorrect! Try again.
60A tractor uses a mechanical differential lock to escape a low-traction patch. It then reaches firm ground and must make a sharp turn. What action best protects the transmission and steering control?
Transmission system
Hard
A.Disengage the lock before initiating the turn
B.Shift to a higher gear before initiating the turn
C.Keep the lock engaged and reduce engine speed
D.Apply one steering brake with the lock engaged
Correct Answer: Disengage the lock before initiating the turn
Explanation:
During a turn, the drive wheels must rotate at different speeds. Keeping the differential locked on firm ground causes driveline wind-up, tire scrub, and impaired steering.
Incorrect! Try again.
Did this save you a night before the exam?
LPU Notes is free, and it stays free. Ads cover part of the server bill.
The rest comes out of a student's own pocket: the domain, the storage,
and keeping the site up through the weeks everyone needs it at once.
The payment button didn't load. An ad blocker or a filtered network is the usual reason.
to try again.
Nothing here is ever locked, and nothing unlocks. Chip in only if it was worth it.
What it pays for →