Unit 1: Fundamentals of trigonometry - Subjective Questions
MTH110 — Remedial Mathematics • Practice Questions with Detailed Answers
20 questions
Define trigonometric ratios with reference to a right-angled triangle. List all six ratios and their reciprocal relationships.
Trigonometric ratios are ratios of the sides of a right-angled triangle with respect to one of its acute angles.
Consider a right-angled triangle with an acute angle , where:
- Hypotenuse = side opposite the right angle
- Opposite = side opposite to
- Adjacent = side adjacent to
The six ratios are:
Reciprocal relationships:
Also, and .
Find the values of all six trigonometric ratios for the angle and explain how they are derived.
The values of trigonometric ratios for can be derived using an equilateral triangle of side units, bisected to form a right-angled triangle.
In this triangle, for the angle :
- Hypotenuse =
- Side opposite to =
- Side adjacent to =
The six ratios:
Explanation: When an equilateral triangle of side is split by an altitude, it creates two -- triangles. The altitude, by the Pythagorean theorem, is . Applying the ratio definitions gives the values above.
State and prove the three fundamental trigonometric (Pythagorean) identities.
The three fundamental Pythagorean identities are:
Proof of Identity 1:
Consider a right triangle with sides (opposite), (adjacent), and hypotenuse . By the Pythagorean theorem:
Dividing both sides by :
Since and :
Proof of Identity 2:
Divide identity 1 by :
Proof of Identity 3:
Divide identity 1 by :
Explain the relation between radian measure and degree measure. Convert to radians and radians to degrees.
Relation between radian and degree:
A radian is the angle subtended at the centre of a circle by an arc equal in length to the radius. The relation is based on the fact that a complete circle subtends or radians.
Therefore:
Conversion 1: Convert to radians:
Conversion 2: Convert radians to degrees:
Describe how radian measure connects angles with real numbers, and explain why this connection makes trigonometric functions functions of real variables.
Radian measure and real numbers:
When we measure angles in radians, every angle corresponds to a unique real number, and every real number corresponds to a unique angle. This one-to-one correspondence arises because the radian measure of an angle is defined as the ratio:
Since this is a ratio of two lengths, it is a dimensionless real number.
Key points:
- A positive real number represents an angle measured counter-clockwise.
- A negative real number represents an angle measured clockwise.
- Real numbers beyond represent angles obtained after one or more complete rotations.
Why trigonometric functions become functions of real variables:
- Because each real number maps to a unique angle of radians, we can define , , etc., where is any real number.
- This allows us to treat trigonometric functions as functions , enabling their use in calculus, graphing, and analysis.
- It removes the dependence on degrees and unifies trigonometry with the study of real-valued functions.
State the domain and range of the six trigonometric functions.
The domain is the set of allowed input values and the range is the set of possible output values.
| Function | Domain | Range |
|---|---|---|
Notes:
- and are defined for all reals because they come directly from coordinates on the unit circle.
- and are undefined where .
- and are undefined where .
- and never take values between and (exclusive).
Derive the formula for and use it to find .
Derivation of :
Consider a unit circle with points and . Using the distance formula and comparing with the angle placed at the origin, we equate distances of chords subtending equal angles.
The standard result obtained is:
Application — Finding :
Write :
Rationalizing:
Derive the formula for and hence find the value of .
Derivation of :
Using the known result and the complementary angle relation :
So:
Application — Finding :
Write :
Distinguish between trigonometric ratios and trigonometric functions.
Trigonometric ratios and trigonometric functions are related but conceptually different.
| Basis | Trigonometric Ratios | Trigonometric Functions |
|---|---|---|
| Definition | Ratios of sides of a right-angled triangle | Functions defined for all real numbers (angles) |
| Domain | Acute angles ( to ) | All real numbers (with restrictions for some) |
| Basis | Geometry of triangles | Unit circle / real analysis |
| Nature | Fixed numerical values for a given angle | Mapping |
| Example | where |
Explanation:
- Trigonometric ratios came first, historically defined only for acute angles inside a right triangle.
- Trigonometric functions generalize these ratios using the unit circle so they apply to any angle, including negative and reflex angles.
- This generalization allows periodicity, graphing, and use in calculus, which ratios alone cannot support.
Prove that .
To Prove:
Proof: Let , so .
LHS:
Using :
Now .
Therefore:
Explain the concept of the unit circle and how trigonometric functions are defined using it.
The Unit Circle:
The unit circle is a circle of radius centred at the origin of the coordinate plane, described by the equation:
Defining trigonometric functions:
For any real number , measure an angle of radians counter-clockwise from the positive -axis. This determines a point on the unit circle. Then:
- (the x-coordinate)
- (the y-coordinate)
- (for )
- , ,
Advantages of this definition:
- Since and , it immediately shows that and lie in .
- The signs of the functions in each quadrant follow from the signs of and .
- is automatic.
- It extends the definitions to all angles, giving periodic functions with period .
Prove that using the sum formulas for sine and cosine.
To Prove:
Proof: By definition:
Using the sum formulas:
Divide numerator and denominator by :
Note: This is valid provided , , and .
Describe the signs of the trigonometric functions in the four quadrants and state the rule used to remember them.
The sign of a trigonometric function depends on the signs of the coordinates of the point on the unit circle in each quadrant.
| Quadrant | Angle Range | |||
|---|---|---|---|---|
| I | to | |||
| II | to | |||
| III | to | |||
| IV | to |
Memory Rule — "All Silver Tea Cups" (ASTC):
- A (Quadrant I): All functions positive.
- S (Quadrant II): Sin (and csc) positive; rest negative.
- T (Quadrant III): Tan (and cot) positive; rest negative.
- C (Quadrant IV): Cos (and sec) positive; rest negative.
The reciprocal functions () share the same sign as their corresponding primary functions ().
If and lies in the first quadrant, find the values of all other trigonometric ratios.
Given: , in Quadrant I (all ratios positive).
Step 1 — Find :
Using :
Step 2 — Find :
Step 3 — Reciprocal ratios:
Summary:
Prove that .
To Prove:
Proof: Using the expansion formulas:
Multiplying (product is of the form ):
Substitute and :
Explain the periodicity of trigonometric functions. State the periods of all six functions.
Periodicity:
A function is said to be periodic with period if for all in its domain, where is the smallest positive such number.
Trigonometric functions are periodic because they are defined via the unit circle. After completing one full rotation ( radians), the point returns to the same position, so the values repeat.
Periods of the six functions:
- has period :
- has period :
- has period
- has period
- has period :
- has period
Why and have period :
Since , adding changes the signs of both and , which cancel out, leaving the value unchanged after only instead of .
Prove the identity .
To Prove:
Method — Cross multiplication verification:
We show that .
LHS of cross product:
Using the identity , we get .
RHS of cross product:
Since both sides equal :
Therefore, dividing appropriately:
(Valid for and .)
Compare the graphs of and . Describe their key features and the relationship between them.
Graph of :
- Domain: ; Range:
- Passes through the origin
- Period:
- Maximum at ; Minimum at
- Odd function: (symmetric about origin)
Graph of :
- Domain: ; Range:
- Passes through
- Period:
- Maximum at ; Minimum at
- Even function: (symmetric about y-axis)
Relationship between them:
- Both are smooth, continuous, wave-like curves with the same shape, amplitude, and period.
- The cosine graph is the sine graph shifted left by :
- Equivalently, .
- This phase shift is why they are called co-functions.
Prove that and use it to express as a product.
To Prove:
Proof: Using the expansion formulas:
Adding the two equations:
Application — Express as a product:
We want and . Solving:
Therefore:
This is the sum-to-product transformation.
Prove that .
To Prove:
Proof: Let and , so that .
We need .
Using the identity :
Substitute :
Replacing back , :
Alternate form: Since , we have , so the result can also be written as:
Define trigonometric ratios with reference to a right-angled triangle. List all six ratios and their reciprocal relationships.
Trigonometric ratios are ratios of the sides of a right-angled triangle with respect to one of its acute angles.
Consider a right-angled triangle with an acute angle , where:
- Hypotenuse = side opposite the right angle
- Opposite = side opposite to
- Adjacent = side adjacent to
The six ratios are:
Reciprocal relationships:
Also, and .
Did this save you a night before the exam?
LPU Notes is free, and it stays free. Ads cover part of the server bill. The rest comes out of a student's own pocket: the domain, the storage, and keeping the site up through the weeks everyone needs it at once.
The payment button didn't load. An ad blocker or a filtered network is the usual reason. to try again.
Nothing here is ever locked, and nothing unlocks. Chip in only if it was worth it. What it pays for →